[Fri Jun 21 18:57:46 2013] Detection parameters:
  Position = (277.1, 336.0) = 7 58 41.66 -60 50 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 11.8
  Background counts = 43.2
  Rate = 0.003 +/- 0.0009

[Fri Jun 21 18:57:47 2013] Off-axis axis estimate = 3.13'
[Fri Jun 21 18:58:27 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:27 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun 21 18:58:27 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.732
[Fri Jun 21 18:58:27 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 8.00"
[Fri Jun 21 18:58:29 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src57.ximg exists
[Fri Jun 21 18:58:29 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Jun 21 18:58:29 2013] Fit fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src57 appears to have run properly
[Fri Jun 21 18:58:35 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Jun 21 18:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jun 21 18:58:35 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Jun 21 18:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jun 21 18:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:58 2013] Source 59 is offset by 7.413420 and 6.352876 pixels which is larger than
2 X fitted extent = 0.918970 x 0.918970, not incorporating fit results
[Fri Jun 21 18:58:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:58:58 2013] Assessing source extent using major
[Fri Jun 21 18:58:58 2013] Source does appear to be extended
[Fri Jun 21 18:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:31 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:31 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun 21 18:59:31 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.732
[Fri Jun 21 18:59:31 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 8.00"
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src54.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src54.csv
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src54.csv
[Fri Jun 21 18:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:34 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri Jun 21 18:59:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Jun 21 18:59:34 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri Jun 21 18:59:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Jun 21 18:59:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:54 2013] Source 59 is offset by -7.275453 and 6.352876 pixels which is larger than
2 X fitted extent = 0.918970 x 0.918970, not incorporating fit results
[Fri Jun 21 18:59:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:54 2013] Assessing source extent using major
[Fri Jun 21 18:59:54 2013] Source does appear to be extended
[Fri Jun 21 18:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:27 2013] XMMSAS src. selection expression = ellipse(24057.137573, 29183.598236, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:27 2013] Not overwriting source region fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src.reg
[Fri Jun 21 19:00:27 2013] Extracting stamp from image fullrun_pn_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (240, 299) - (315, 374)
[Fri Jun 21 19:00:27 2013] XMMSAS bgd. selection expression = annulus(24057.137573, 29183.598236, 1087.500000, 2175.000000, X, Y) && !ellipse(22780.420635, 30727.465952, 514.742121, 432.213705, 320.702604, X, Y) && !ellipse(25821.531982, 31268.802490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.053314, 29723.604645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23082.035583, 27267.816711, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:00:27 2013] Writing fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59.gif
[Fri Jun 21 19:00:33 2013] ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src.evt and ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:34 2013] Mean detx,y = (-3283.85, -1626.80) 
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src.img and ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:34 2013] Setting source spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri Jun 21 19:00:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_bgd.lc exist, delete to re-create
[Fri Jun 21 19:00:46 2013] Not generating rmf since there are only 43 counts
[Fri Jun 21 19:00:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:00:46 2013] fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59.arf exists, delete to re-create
[Fri Jun 21 19:59:10 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:10 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 310.00
[Fri Jun 21 19:59:10 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_bgd.pi.gz = 1589.00
[Fri Jun 21 19:59:10 2013] Got source and background scale factors 1088513.000000, 7070943.000000
[Fri Jun 21 19:59:10 2013] User source parameters:
  Position = (277.1, 336.0) = 7 58 41.66 -60 50 50.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 65.4 +/- 18.6
  Background aperture counts = 244.6
  Rate = 0.003 +/- 0.0009

[Fri Jun 21 19:59:10 2013] Updating counts from extracted products
[Fri Jun 21 19:59:10 2013] Set source signif. to 65.39/15.64 = 4.18
[Fri Jun 21 19:59:16 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:16 2013] Using photon index=1.80, rate=0.00327, arf fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59.arf
[Fri Jun 21 19:59:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:16 2013] Updating source flux to 1.7e-14
[Fri Jun 21 19:59:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:48 2013] xmm0113891001/analysis//spectral/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete