[Fri Jun 21 18:57:45 2013] Detection parameters:
  Position = (409.1, 351.2) = 7 57 23.10 -60 49 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 14.4
  Background counts = 40.3
  Rate = 0.008 +/- 0.001

[Fri Jun 21 18:57:47 2013] Off-axis axis estimate = 8.89'
[Fri Jun 21 18:58:27 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:27 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Fri Jun 21 18:58:27 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Fri Jun 21 18:58:27 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 10.87"
[Fri Jun 21 18:58:29 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src53.ximg exists
[Fri Jun 21 18:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src53.csv
[Fri Jun 21 18:58:29 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Jun 21 18:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src53.csv
[Fri Jun 21 18:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:35 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Jun 21 18:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Jun 21 18:58:35 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Jun 21 18:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Jun 21 18:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:58 2013] Warning, spatial fit 53 centroid is now closest to src. 47
[Fri Jun 21 18:58:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:58:58 2013] Assessing source extent using major
[Fri Jun 21 18:58:58 2013] Source does appear to be extended
[Fri Jun 21 18:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:31 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:31 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Fri Jun 21 18:59:31 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Fri Jun 21 18:59:31 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 10.87"
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src50.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src50.csv
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src50.csv
[Fri Jun 21 18:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:34 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri Jun 21 18:59:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src50.csv
[Fri Jun 21 18:59:34 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri Jun 21 18:59:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src50.csv
[Fri Jun 21 18:59:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:54 2013] Source 55 is offset by 3.234577 and -5.930652 pixels which is larger than
2 X fitted extent = 1.241168 x 1.241168, not incorporating fit results
[Fri Jun 21 18:59:54 2013] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 14.646533 pixels away
[Fri Jun 21 18:59:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:54 2013] Assessing source extent using major
[Fri Jun 21 18:59:54 2013] Source does appear to be extended
[Fri Jun 21 18:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:27 2013] XMMSAS src. selection expression = ellipse(35544.488220, 30504.945251, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:27 2013] Not overwriting source region fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src.reg
[Fri Jun 21 19:00:27 2013] Extracting stamp from image fullrun_pn_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (372, 314) - (447, 389)
[Fri Jun 21 19:00:27 2013] XMMSAS bgd. selection expression = annulus(35544.488220, 30504.945251, 1087.500000, 2175.000000, X, Y) && !ellipse(32513.358093, 33120.194244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34449.094818, 31839.057648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37368.650140, 31105.145000, 464.589613, 464.589613, 0.000000, X, Y) && !ellipse(34781.298000, 28384.259600, 547.525616, 547.525616, 0.000000, X, Y)
[Fri Jun 21 19:00:27 2013] Writing fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55.gif
[Fri Jun 21 19:00:33 2013] ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:33 2013] Mean detx,y = (7962.31, -4129.17) 
[Fri Jun 21 19:00:33 2013] ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src.img and ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:33 2013] ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:33 2013] Setting source spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Fri Jun 21 19:00:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Fri Jun 21 19:00:33 2013] ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Fri Jun 21 19:00:46 2013] Not generating rmf since there are only 97 counts
[Fri Jun 21 19:00:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:00:46 2013] fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55.arf exists, delete to re-create
[Fri Jun 21 19:59:09 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:09 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 321.00
[Fri Jun 21 19:59:10 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_bgd.pi.gz = 1752.00
[Fri Jun 21 19:59:10 2013] Got source and background scale factors 1284894.000000, 8077495.000000
[Fri Jun 21 19:59:10 2013] User source parameters:
  Position = (409.1, 351.2) = 7 57 23.10 -60 49 39.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 42.3 +/- 18.9
  Background aperture counts = 278.7
  Rate = 0.002 +/- 0.0009

[Fri Jun 21 19:59:10 2013] Updating counts from extracted products
[Fri Jun 21 19:59:10 2013] Set source signif. to 42.31/16.69 = 2.53
[Fri Jun 21 19:59:16 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:16 2013] Using photon index=1.80, rate=0.00212, arf fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55.arf
[Fri Jun 21 19:59:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:16 2013] Updating source flux to 1.3e-14
[Fri Jun 21 19:59:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:48 2013] xmm0113891001/analysis//spectral/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete