[Fri Jun 21 18:57:43 2013] Detection parameters:
  Position = (381.7, 178.9) = 7 57 39.06 -61 2 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.3 +/- 14.0
  Background counts = 34.2
  Rate = 0.005 +/- 0.0007

[Fri Jun 21 18:57:47 2013] Off-axis axis estimate = 10.56'
[Fri Jun 21 18:58:27 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:27 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Jun 21 18:58:27 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.883
[Fri Jun 21 18:58:27 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.71"
[Fri Jun 21 18:58:28 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 21 18:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src10.csv
[Fri Jun 21 18:58:28 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 21 18:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src10.csv
[Fri Jun 21 18:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 21 18:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 21 18:58:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 21 18:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 21 18:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:58 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.288102 pixels away
[Fri Jun 21 18:58:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:58:58 2013] Assessing source extent using major
[Fri Jun 21 18:58:58 2013] Source does appear to be extended
[Fri Jun 21 18:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:31 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:31 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Jun 21 18:59:31 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.883
[Fri Jun 21 18:59:31 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.71"
[Fri Jun 21 18:59:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jun 21 18:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src10.csv
[Fri Jun 21 18:59:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jun 21 18:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src10.csv
[Fri Jun 21 18:59:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jun 21 18:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:54 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.986405 pixels away
[Fri Jun 21 18:59:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:54 2013] Assessing source extent using major
[Fri Jun 21 18:59:54 2013] Source does appear to be extended
[Fri Jun 21 18:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:26 2013] XMMSAS src. selection expression = ellipse(33163.667694, 15514.392303, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:26 2013] Not overwriting source region fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src.reg
[Fri Jun 21 19:00:26 2013] Extracting stamp from image fullrun_pn_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (344, 141) - (419, 216)
[Fri Jun 21 19:00:26 2013] XMMSAS bgd. selection expression = annulus(33163.667694, 15514.392303, 1087.500000, 2175.000000, X, Y) && !ellipse(30568.084503, 16954.831985, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:00:26 2013] Writing fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11.gif
[Fri Jun 21 19:00:29 2013] ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:29 2013] Mean detx,y = (7233.08, 11018.15) 
[Fri Jun 21 19:00:29 2013] ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src.img and ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:29 2013] ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:29 2013] Setting source spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 21 19:00:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jun 21 19:00:29 2013] ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Jun 21 19:00:46 2013] Not generating rmf since there are only 97 counts
[Fri Jun 21 19:00:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:00:46 2013] fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Fri Jun 21 19:59:02 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:02 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 279.00
[Fri Jun 21 19:59:02 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1721.00
[Fri Jun 21 19:59:02 2013] Got source and background scale factors 1063737.000000, 9718305.000000
[Fri Jun 21 19:59:02 2013] User source parameters:
  Position = (381.7, 178.9) = 7 57 39.06 -61 2 10.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 90.6 +/- 17.7
  Background aperture counts = 188.4
  Rate = 0.005 +/- 0.0009

[Fri Jun 21 19:59:02 2013] Updating counts from extracted products
[Fri Jun 21 19:59:02 2013] Set source signif. to 90.62/13.72 = 6.60
[Fri Jun 21 19:59:15 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:15 2013] Using photon index=1.80, rate=0.00453, arf fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11.arf
[Fri Jun 21 19:59:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:15 2013] Updating source flux to 4.3e-14
[Fri Jun 21 19:59:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:48 2013] xmm0113891001/analysis//spectral/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete