[Fri Jun 21 18:57:42 2013] Detection parameters:
  Position = (184.7, 421.7) = 7 59 36.44 -60 44 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.7 +/- 23.8
  Background counts = 35.5
  Rate = 0.02 +/- 0.001

[Fri Jun 21 18:57:47 2013] Off-axis axis estimate = 12.16'
[Fri Jun 21 18:58:27 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 18:58:27 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Jun 21 18:58:27 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075
[Fri Jun 21 18:58:27 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.51"
[Fri Jun 21 18:58:28 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 21 18:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src1.csv
[Fri Jun 21 18:58:28 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 21 18:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src1.csv
[Fri Jun 21 18:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:31 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 21 18:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 21 18:58:31 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 21 18:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 21 18:58:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:58 2013] Warning, spatial fit 1 centroid is now closest to src. 19
[Fri Jun 21 18:58:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:58:58 2013] Assessing source extent using major
[Fri Jun 21 18:58:58 2013] Source does appear to be extended
[Fri Jun 21 18:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:31 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 18:59:31 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Jun 21 18:59:31 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075
[Fri Jun 21 18:59:31 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.51"
[Fri Jun 21 18:59:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 21 18:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 18:59:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 21 18:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 18:59:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 18:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:54 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.103423 pixels away
[Fri Jun 21 18:59:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:54 2013] Assessing source extent using major
[Fri Jun 21 18:59:54 2013] Source does appear to be extended
[Fri Jun 21 18:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:26 2013] XMMSAS src. selection expression = ellipse(16019.811646, 36641.710938, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:26 2013] Not overwriting source region fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 21 19:00:26 2013] Extracting stamp from image fullrun_pn_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (147, 384) - (222, 459)
[Fri Jun 21 19:00:26 2013] XMMSAS bgd. selection expression = annulus(16019.811646, 36641.710938, 1087.500000, 2175.000000, X, Y) && !ellipse(13855.107100, 38102.051200, 680.269620, 270.223208, 312.330177, X, Y) && !ellipse(18191.981384, 34791.492706, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:00:26 2013] Writing fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1.gif
[Fri Jun 21 19:00:27 2013] ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:28 2013] Mean detx,y = (-12080.15, -8076.54) 
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src.img and ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:28 2013] Setting source spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 21 19:00:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Jun 21 19:00:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 19:00:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:00:46 2013] fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Fri Jun 21 19:59:00 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:00 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 534.00
[Fri Jun 21 19:59:00 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1721.00
[Fri Jun 21 19:59:00 2013] Got source and background scale factors 1342400.000000, 9628532.000000
[Fri Jun 21 19:59:00 2013] User source parameters:
  Position = (184.7, 421.7) = 7 59 36.44 -60 44 32.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 294.1 +/- 24.1
  Background aperture counts = 239.9
  Rate = 0.01 +/- 0.001

[Fri Jun 21 19:59:00 2013] Updating counts from extracted products
[Fri Jun 21 19:59:00 2013] Set source signif. to 294.06/15.49 = 18.98
[Fri Jun 21 19:59:15 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:15 2013] Using photon index=1.80, rate=0.0147, arf fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1.arf
[Fri Jun 21 19:59:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:15 2013] Updating source flux to 1.7e-13
[Fri Jun 21 19:59:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:48 2013] xmm0113891001/analysis//spectral/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete