[Fri Jun 21 18:57:56 2013] Detection parameters:
  Position = (412.9, 148.9) = 7 57 20.34 -61 4 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.3 +/- 12.7
  Background counts = 8.6
  Rate = 0.005 +/- 0.0006

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 13.65'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Fri Jun 21 18:58:37 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 13.25"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun 21 18:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src17.csv
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun 21 18:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src17.csv
[Fri Jun 21 18:58:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun 21 18:58:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun 21 18:58:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Jun 21 18:58:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:14 2013] Spatial fit model total counts = 218.218000, observed total counts = 198.000000
[Fri Jun 21 18:59:14 2013] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 18:59:14 2013] Source 49 is offset by -2.349259 and -1.494518 pixels which is larger than
2 X fitted extent = 2.167025 x 2.167025, not incorporating fit results
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:36 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Fri Jun 21 18:59:36 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 13.25"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun 21 18:59:37 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun 21 18:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun 21 18:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jun 21 18:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 19:00:10 2013] Spatial fit model total counts = 213.625000, observed total counts = 198.000000
[Fri Jun 21 19:00:10 2013] Offset between fit and detection position for source 49 = 0.324717 pixels
[Fri Jun 21 19:00:10 2013] 215.525400 total counts/ 152.102000 bgd. counts: snr = 5.142592
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.324717 pixels
  Position = (413.1, 149.1) = 7 57 20.19 -61 4 18.7
  Extent = 8.9" x 2.9", rotation angle = 142
  Source counts = 63.4 +/- 14.7
  Background counts = 152.1
  Rate = 0.003 +/- 0.0007
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 3.06
[Fri Jun 21 19:00:10 2013] Source is asymmetric
[Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(35893.174600, 12925.383200, 536.323215, 175.317005, 142.100437, X, Y)
[Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49_src.reg
[Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (382, 118) - (444, 180)
[Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(35893.174600, 12925.383200, 893.872026, 1787.744051, X, Y) && !ellipse(33337.524323, 15488.698257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36295.182000, 13846.763200, 360.463210, 360.463210, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49.gif
[Fri Jun 21 19:19:23 2013] Mean detx,y = (-10276.75, -13349.56) 
[Fri Jun 21 19:19:24 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:19:37 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:19:38 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jun 21 19:19:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri Jun 21 19:51:25 2013] Not generating rmf since there are only 63 counts
[Fri Jun 21 19:51:25 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:26 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:26 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 64.00
[Fri Jun 21 19:59:26 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49_bgd.pi.gz = 181.00
[Fri Jun 21 19:59:26 2013] Got source and background scale factors 291200.000000, 4178243.000000
[Fri Jun 21 19:59:26 2013] User source parameters:
  Position = (413.1, 149.1) = 7 57 20.19 -61 4 18.7
  Extent = 8.9" x 2.9", rotation angle = 142
  Source aperture counts = 51.4 +/- 9.0
  Background aperture counts = 12.6
  Rate = 0.003 +/- 0.0005

[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00317, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 1.5e-13
[Fri Jun 21 19:59:35 2013] Flag b found in src. 49 procflags, skipping spectral fitting
[Fri Jun 21 19:59:35 2013] Flag p found in src. 49 procflags, skipping spectral fitting
[Fri Jun 21 19:59:35 2013] Source 49 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete