[Fri Jun 21 18:57:55 2013] Detection parameters:
  Position = (310.2, 222.1) = 7 58 21.89 -60 59 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.0 +/- 8.6
  Background counts = 11.9
  Rate = 0.002 +/- 0.0006

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 5.60'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Fri Jun 21 18:58:37 2013] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.946
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 9.23"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src36.ximg exists
[Fri Jun 21 18:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src36.csv
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Jun 21 18:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src36.csv
[Fri Jun 21 18:58:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:41 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Jun 21 18:58:41 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Jun 21 18:58:41 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Jun 21 18:59:14 2013] Spatial fit model total counts = 134.226000, observed total counts = 130.000000
[Fri Jun 21 18:59:14 2013] Offset between fit and detection position for source 46 = 0.105173 pixels
[Fri Jun 21 18:59:14 2013] 136.888200 total counts/ 101.111000 bgd. counts: snr = 3.558010
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.105173 pixels
  Position = (310.1, 222.1) = 7 58 21.96 -60 59 2.4
  Extent = 7.7 (5.2-11.9)", rotation angle = 0
  Source counts = 35.8 +/- 11.7
  Background counts = 101.1
  Rate = 0.002 +/- 0.0006
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Jun 21 18:59:36 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.771
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.73"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src35.csv
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src35.csv
[Fri Jun 21 18:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jun 21 18:59:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Jun 21 19:00:10 2013] Spatial fit model total counts = 133.541000, observed total counts = 130.000000
[Fri Jun 21 19:00:10 2013] Offset between fit and detection position for source 46 = 0.005432 pixels
[Fri Jun 21 19:00:10 2013] 136.263500 total counts/ 99.329500 bgd. counts: snr = 3.705845
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.005432 pixels
  Position = (310.1, 222.1) = 7 58 21.96 -60 59 2.4
  Extent = 8.2 (5.1-12.0)", rotation angle = 0
  Source counts = 36.9 +/- 11.7
  Background counts = 99.3
  Rate = 0.002 +/- 0.0006
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(26932.834260, 19273.147400, 491.247014, 491.247014, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46_src.reg
[Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (282, 194) - (338, 250)
[Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(26932.834260, 19273.147400, 818.745024, 1637.490047, X, Y)
[Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46.gif
[Fri Jun 21 19:23:27 2013] Mean detx,y = (-638.04, -8106.89) 
[Fri Jun 21 19:23:28 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:23:49 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:23:50 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Jun 21 19:23:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri Jun 21 19:52:55 2013] Not generating rmf since there are only 36 counts
[Fri Jun 21 19:52:55 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:28 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:28 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 72.00
[Fri Jun 21 19:59:28 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46_bgd.pi.gz = 323.00
[Fri Jun 21 19:59:28 2013] Got source and background scale factors 671280.000000, 5433661.000000
[Fri Jun 21 19:59:28 2013] User source parameters:
  Position = (310.1, 222.1) = 7 58 21.96 -60 59 2.4
  Extent = 8.2 (5.1-12.0)", rotation angle = 0
  Source aperture counts = 32.1 +/- 9.5
  Background aperture counts = 39.9
  Rate = 0.002 +/- 0.0005

[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 3.5e-14
[Fri Jun 21 19:59:35 2013] Source 46 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete