[Fri Jun 21 18:57:52 2013] Detection parameters:
  Position = (251.0, 442.9) = 7 58 57.07 -60 43 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.8 +/- 17.5
  Background counts = 10.0
  Rate = 0.01 +/- 0.0009

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 11.02'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 11.94"
[Fri Jun 21 18:58:37 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.855
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.94"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 21 18:58:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 21 18:58:39 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun 21 18:59:14 2013] Spatial fit model total counts = 303.835000, observed total counts = 303.000000
[Fri Jun 21 18:59:14 2013] Offset between fit and detection position for source 4 = 0.253719 pixels
[Fri Jun 21 18:59:14 2013] 304.057000 total counts/ 155.596000 bgd. counts: snr = 11.901814
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.253719 pixels
  Position = (250.8, 442.7) = 7 58 57.19 -60 43 2.5
  Extent = 9.4 (7.7-11.1)" x 5.5 (4.4-6.9)", rotation angle = 141 (125-156) degrees
  Source counts = 148.5 +/- 17.4
  Background counts = 155.6
  Rate = 0.007 +/- 0.0009
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Fri Jun 21 18:59:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 7.43"
[Fri Jun 21 18:59:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.43"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 18:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 21 18:59:37 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun 21 19:00:10 2013] Spatial fit model total counts = 283.999000, observed total counts = 284.000000
[Fri Jun 21 19:00:10 2013] Offset between fit and detection position for source 4 = 0.014078 pixels
[Fri Jun 21 19:00:10 2013] 282.947000 total counts/ 127.221000 bgd. counts: snr = 13.806441
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.014078 pixels
  Position = (250.8, 442.7) = 7 58 57.19 -60 43 2.5
  Extent = 8.0 (6.4-9.5)", rotation angle = 0
  Source counts = 155.7 +/- 16.8
  Background counts = 127.2
  Rate = 0.008 +/- 0.0008
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:16:15 2013] XMMSAS src. selection expression = ellipse(21772.145400, 38468.613200, 478.045814, 478.045814, 0.000000, X, Y)
[Fri Jun 21 19:16:15 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 21 19:16:15 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (223, 415) - (278, 470)
[Fri Jun 21 19:16:15 2013] XMMSAS bgd. selection expression = annulus(21772.145400, 38468.613200, 796.743023, 1593.486046, X, Y) && !ellipse(19684.802139, 39229.252045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25207.356000, 39616.672000, 1958.456056, 1958.456056, 0.000000, X, Y)
[Fri Jun 21 19:16:15 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4.gif
[Fri Jun 21 19:16:49 2013] Mean detx,y = (6816.20, 10326.20) 
[Fri Jun 21 19:16:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:16:59 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:16:59 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 21 19:16:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 21 19:59:24 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:24 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 206.00
[Fri Jun 21 19:59:24 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4_bgd.pi.gz = 350.00
[Fri Jun 21 19:59:24 2013] Got source and background scale factors 721600.000000, 5582120.000000
[Fri Jun 21 19:59:24 2013] User source parameters:
  Position = (250.8, 442.7) = 7 58 57.19 -60 43 2.5
  Extent = 8.0 (6.4-9.5)", rotation angle = 0
  Source aperture counts = 160.8 +/- 15.4
  Background aperture counts = 45.2
  Rate = 0.008 +/- 0.0008

[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00779, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 2.6e-13
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete