[Fri Jun 21 18:57:54 2013] Detection parameters: Position = (254.1, 262.8) = 7 58 55.41 -60 56 1.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 30.9 +/- 8.6 Background counts = 12.6 Rate = 0.002 +/- 0.0006 [Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 4.12' [Fri Jun 21 18:58:37 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting [Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 8.49" [Fri Jun 21 18:58:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040 [Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 8.49" [Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src44.ximg exists [Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src44_1.ximg exists [Fri Jun 21 18:58:39 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src44 appears to have run properly [Fri Jun 21 18:58:41 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src44.ximg exists [Fri Jun 21 18:58:41 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists [Fri Jun 21 18:58:41 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly [Fri Jun 21 18:59:14 2013] Source 39 is offset by 0.576759 and -1.029382 pixels which is larger than 2 X fitted extent = 0.975862 x 0.975862, not incorporating fit results [Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000 [Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 21 18:59:14 2013] Assessing source extent using major [Fri Jun 21 18:59:14 2013] Source does appear to be extended [Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 21 18:59:36 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting [Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 8.49" [Fri Jun 21 18:59:36 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040 [Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.49" [Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src42.ximg exists [Fri Jun 21 18:59:37 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src42.csv [Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src42_1.ximg exists [Fri Jun 21 18:59:37 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src42.csv [Fri Jun 21 18:59:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src42_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src42.ximg exists [Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists [Fri Jun 21 18:59:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly [Fri Jun 21 19:00:10 2013] Source 39 is offset by 5.478285 and -3.846341 pixels which is larger than 2 X fitted extent = 0.975862 x 0.975862, not incorporating fit results [Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000 [Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 21 19:00:10 2013] Assessing source extent using major [Fri Jun 21 19:00:10 2013] Source does appear to be extended [Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(22058.282837, 22817.212341, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39_src.reg [Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (217, 225) - (292, 300) [Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(22058.282837, 22817.212341, 1087.500000, 2175.000000, X, Y) && !ellipse(23866.683580, 23564.101000, 436.962413, 436.962413, 0.000000, X, Y) && !ellipse(23191.348720, 25012.647800, 324.068009, 324.068009, 0.000000, X, Y) && !ellipse(22551.937744, 25748.324860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22754.580200, 22839.772125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22422.378800, 24750.797800, 463.052013, 463.052013, 0.000000, X, Y) [Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39.gif [Fri Jun 21 19:25:14 2013] Mean detx,y = (4597.73, -5203.51) [Fri Jun 21 19:25:15 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 21 19:25:45 2013] Binned source spectrum to 10 counts/bin [Fri Jun 21 19:25:45 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Fri Jun 21 19:25:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39_bgd.pi.gz [Fri Jun 21 19:53:36 2013] Not generating rmf since there are only 30 counts [Fri Jun 21 19:53:36 2013] rmf not generated due to insufficient counts [Fri Jun 21 19:59:29 2013] Updating aperture counts using extracted products [Fri Jun 21 19:59:29 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 154.00 [Fri Jun 21 19:59:29 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39_bgd.pi.gz = 519.00 [Fri Jun 21 19:59:29 2013] Got source and background scale factors 1340800.000000, 8175903.000000 [Fri Jun 21 19:59:29 2013] User source parameters: Position = (254.1, 262.8) = 7 58 55.41 -60 56 1.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 68.9 +/- 13.4 Background aperture counts = 85.1 Rate = 0.003 +/- 0.0007 [Fri Jun 21 19:59:29 2013] Updating counts from extracted products [Fri Jun 21 19:59:29 2013] Set source signif. to 68.89/9.23 = 7.47 [Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00345, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39.arf [Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 21 19:59:30 2013] Updating source flux to 5.8e-14 [Fri Jun 21 19:59:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete