[Fri Jun 21 18:57:54 2013] Detection parameters:
  Position = (384.7, 283.4) = 7 57 37.47 -60 54 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 8.9
  Background counts = 12.7
  Rate = 0.003 +/- 0.0006

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 6.35'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Jun 21 18:58:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.682
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.60"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 21 18:58:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src33 appears to have run properly
[Fri Jun 21 18:58:41 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 21 18:58:41 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 21 18:58:41 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Jun 21 18:59:14 2013] Spatial fit model total counts = 152.306000, observed total counts = 154.000000
[Fri Jun 21 18:59:14 2013] Offset between fit and detection position for source 35 = 0.154599 pixels
[Fri Jun 21 18:59:14 2013] 148.594500 total counts/ 120.289000 bgd. counts: snr = 2.580821
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.154599 pixels
  Position = (384.7, 283.6) = 7 57 37.51 -60 54 34.3
  Extent = 3.5 (2.5-4.6)", rotation angle = 0
  Source counts = 28.3 +/- 12.2
  Background counts = 120.3
  Rate = 0.001 +/- 0.0006
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 3.49"
[Fri Jun 21 18:59:36 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.325
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 3.49"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src33.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src33.csv
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src33.csv
[Fri Jun 21 18:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Jun 21 18:59:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Jun 21 19:00:10 2013] Spatial fit model total counts = 152.972000, observed total counts = 154.000000
[Fri Jun 21 19:00:10 2013] Offset between fit and detection position for source 35 = 0.049348 pixels
[Fri Jun 21 19:00:10 2013] 149.282600 total counts/ 119.939000 bgd. counts: snr = 2.679373
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.049348 pixels
  Position = (384.7, 283.6) = 7 57 37.48 -60 54 34.4
  Extent = 3.6 (2.5-4.8)", rotation angle = 0
  Source counts = 29.3 +/- 12.2
  Background counts = 119.9
  Rate = 0.001 +/- 0.0006
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(33422.091200, 24621.442800, 218.785806, 218.785806, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35_src.reg
[Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (372, 271) - (397, 296)
[Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(33422.091200, 24621.442800, 364.643010, 729.286021, X, Y)
[Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35.gif
[Fri Jun 21 19:22:59 2013] Mean detx,y = (-6411.11, -2019.86) 
[Fri Jun 21 19:23:00 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:23:09 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:23:09 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jun 21 19:23:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Jun 21 19:52:41 2013] Not generating rmf since there are only 29 counts
[Fri Jun 21 19:52:41 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:28 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:28 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 36.00
[Fri Jun 21 19:59:28 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35_bgd.pi.gz = 82.00
[Fri Jun 21 19:59:28 2013] Got source and background scale factors 142428.000000, 1200448.000000
[Fri Jun 21 19:59:28 2013] User source parameters:
  Position = (384.7, 283.6) = 7 57 37.48 -60 54 34.4
  Extent = 3.6 (2.5-4.8)", rotation angle = 0
  Source aperture counts = 26.3 +/- 7.1
  Background aperture counts = 9.7
  Rate = 0.001 +/- 0.0004

[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00147, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 3.8e-14
[Fri Jun 21 19:59:35 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete