[Fri Jun 21 18:57:53 2013] Detection parameters:
  Position = (287.7, 389.5) = 7 58 35.32 -60 46 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 11.7
  Background counts = 12.5
  Rate = 0.006 +/- 0.0009

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 6.65'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Fri Jun 21 18:58:37 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.831
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.75"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 21 18:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src11.csv
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 21 18:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src11.csv
[Fri Jun 21 18:58:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 21 18:58:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 21 18:58:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jun 21 18:58:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:14 2013] Spatial fit model total counts = 233.740000, observed total counts = 202.000000
[Fri Jun 21 18:59:14 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:36 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Fri Jun 21 18:59:36 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.831
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.75"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jun 21 18:59:37 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src11 appears to have run properly
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jun 21 18:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jun 21 18:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Jun 21 18:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 19:00:10 2013] Spatial fit model total counts = 215.741000, observed total counts = 202.000000
[Fri Jun 21 19:00:10 2013] Offset between fit and detection position for source 19 = 0.834402 pixels
[Fri Jun 21 19:00:10 2013] 215.443900 total counts/ 136.984000 bgd. counts: snr = 6.703673
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.834402 pixels
  Position = (287.0, 389.9) = 7 58 35.75 -60 46 52.4
  Extent = 7.0 (3.0-6.4)" x 3.3 (2.1-4.3)", rotation angle = 156
  Source counts = 78.5 +/- 14.7
  Background counts = 137.0
  Rate = 0.004 +/- 0.0007
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.70
[Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(24920.115724, 33872.915080, 421.459812, 197.104806, 155.782890, X, Y)
[Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19_src.reg
[Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (263, 366) - (311, 414)
[Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(24920.115724, 33872.915080, 702.433020, 1404.866040, X, Y)
[Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19.gif
[Fri Jun 21 19:18:03 2013] Mean detx,y = (3100.09, 6105.65) 
[Fri Jun 21 19:18:04 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:18:14 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:18:15 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 21 19:18:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jun 21 19:50:54 2013] Not generating rmf since there are only 78 counts
[Fri Jun 21 19:50:54 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:25 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:25 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 77.00
[Fri Jun 21 19:59:25 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19_bgd.pi.gz = 288.00
[Fri Jun 21 19:59:25 2013] Got source and background scale factors 257600.000000, 4152890.000000
[Fri Jun 21 19:59:25 2013] User source parameters:
  Position = (287.0, 389.9) = 7 58 35.75 -60 46 52.4
  Extent = 7.0 (3.0-6.4)" x 3.3 (2.1-4.3)", rotation angle = 156
  Source aperture counts = 59.1 +/- 9.8
  Background aperture counts = 17.9
  Rate = 0.003 +/- 0.0005

[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00392, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 1.1e-13
[Fri Jun 21 19:59:35 2013] Flag p found in src. 19 procflags, skipping spectral fitting
[Fri Jun 21 19:59:35 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete