[Fri Jun 21 18:57:53 2013] Detection parameters:
  Position = (343.3, 391.6) = 7 58 2.32 -60 46 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 9.3
  Background counts = 10.6
  Rate = 0.005 +/- 0.0009

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 7.50'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Fri Jun 21 18:58:37 2013] source mask rpix=2.3, npix_max = 32, mask sum = 23, frac = 0.713
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.18"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jun 21 18:58:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src19 appears to have run properly
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jun 21 18:58:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jun 21 18:58:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 21 18:58:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:14 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.219996 pixels away
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:36 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Fri Jun 21 18:59:36 2013] source mask rpix=2.3, npix_max = 32, mask sum = 23, frac = 0.713
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 10.18"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src19.csv
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src19.csv
[Fri Jun 21 18:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 21 18:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 21 18:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 21 18:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 19:00:10 2013] Source 18 is offset by 4.097996 and -8.453164 pixels which is larger than
2 X fitted extent = 3.182970 x 3.182970, not incorporating fit results
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(29814.483643, 34022.938721, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18_src.reg
[Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (306, 354) - (381, 429)
[Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(29814.483643, 34022.938721, 1087.500000, 2175.000000, X, Y) && !ellipse(30862.569200, 31928.833600, 349.472810, 349.472810, 0.000000, X, Y) && !ellipse(29437.684300, 34665.392000, 505.884815, 505.884815, 0.000000, X, Y) && !ellipse(27570.204400, 35794.032200, 282.878408, 282.878408, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18.gif
[Fri Jun 21 19:19:51 2013] Mean detx,y = (-1607.44, 6984.02) 
[Fri Jun 21 19:19:52 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:20:17 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:20:17 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun 21 19:20:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jun 21 19:51:34 2013] Not generating rmf since there are only 46 counts
[Fri Jun 21 19:51:34 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:26 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:26 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 129.00
[Fri Jun 21 19:59:26 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18_bgd.pi.gz = 699.00
[Fri Jun 21 19:59:26 2013] Got source and background scale factors 974644.000000, 9541848.000000
[Fri Jun 21 19:59:26 2013] User source parameters:
  Position = (343.3, 391.6) = 7 58 2.32 -60 46 48.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 57.6 +/- 12.4
  Background aperture counts = 71.4
  Rate = 0.003 +/- 0.0006

[Fri Jun 21 19:59:26 2013] Updating counts from extracted products
[Fri Jun 21 19:59:26 2013] Set source signif. to 57.60/8.45 = 6.82
[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00288, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 6.1e-14
[Fri Jun 21 19:59:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete