[Fri Jun 21 18:57:53 2013] Detection parameters:
  Position = (339.5, 399.0) = 7 58 4.54 -60 46 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.5 +/- 11.1
  Background counts = 12.4
  Rate = 0.006 +/- 0.0009

[Fri Jun 21 18:57:56 2013] Off-axis axis estimate = 7.88'
[Fri Jun 21 18:58:37 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:37 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Fri Jun 21 18:58:37 2013] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.842
[Fri Jun 21 18:58:37 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.37"
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 21 18:58:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 21 18:58:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_src13 appears to have run properly
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 21 18:58:39 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 21 18:58:39 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 21 18:59:14 2013] Spatial fit model total counts = 208.066000, observed total counts = 214.000000
[Fri Jun 21 18:59:14 2013] Offset between fit and detection position for source 16 = 0.606882 pixels
[Fri Jun 21 18:59:14 2013] 209.074400 total counts/ 164.664000 bgd. counts: snr = 3.460871
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.606882 pixels
  Position = (338.9, 399.0) = 7 58 4.91 -60 46 12.7
  Extent = 6.3 (4.4-8.5)", rotation angle = 0
  Source counts = 44.4 +/- 14.5
  Background counts = 164.7
  Rate = 0.002 +/- 0.0007
[Fri Jun 21 18:59:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 18:59:14 2013] Source does appear to be extended
[Fri Jun 21 18:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:36 2013] Initial guess for spatial extent in simple fitting = 6.26"
[Fri Jun 21 18:59:36 2013] source mask rpix=1.4, npix_max = 15, mask sum = 15, frac = 0.996
[Fri Jun 21 18:59:36 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 6.26"
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src13.csv
[Fri Jun 21 18:59:37 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 21 18:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src13.csv
[Fri Jun 21 18:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 21 18:59:38 2013] fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 21 18:59:38 2013] Fit fullrun_mos2_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun 21 19:00:10 2013] Spatial fit model total counts = 208.033000, observed total counts = 214.000000
[Fri Jun 21 19:00:10 2013] Offset between fit and detection position for source 16 = 0.005197 pixels
[Fri Jun 21 19:00:10 2013] 209.025200 total counts/ 164.325000 bgd. counts: snr = 3.487046
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.005197 pixels
  Position = (338.9, 399.0) = 7 58 4.91 -60 46 12.7
  Extent = 6.3 (4.4-8.5)", rotation angle = 0
  Source counts = 44.7 +/- 14.5
  Background counts = 164.3
  Rate = 0.002 +/- 0.0007
[Fri Jun 21 19:00:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 19:00:10 2013] Source does appear to be extended
[Fri Jun 21 19:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:16:16 2013] XMMSAS src. selection expression = ellipse(29437.684300, 34665.392000, 379.413611, 379.413611, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing source region out to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 21 19:16:16 2013] Extracting stamp from image fullrun_mos2_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (317, 377) - (361, 421)
[Fri Jun 21 19:16:16 2013] XMMSAS bgd. selection expression = annulus(29437.684300, 34665.392000, 632.356018, 1264.712036, X, Y) && !ellipse(29814.483643, 34022.938721, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:16:16 2013] Writing fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16.gif
[Fri Jun 21 19:18:27 2013] Mean detx,y = (-1263.80, 7461.41) 
[Fri Jun 21 19:18:29 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:18:38 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:18:38 2013] Setting source spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 21 19:18:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jun 21 19:51:03 2013] Not generating rmf since there are only 44 counts
[Fri Jun 21 19:51:03 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:25 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:25 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 88.00
[Fri Jun 21 19:59:25 2013] Total counts from fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16_bgd.pi.gz = 172.00
[Fri Jun 21 19:59:25 2013] Got source and background scale factors 419364.000000, 2236584.000000
[Fri Jun 21 19:59:25 2013] User source parameters:
  Position = (338.9, 399.0) = 7 58 4.91 -60 46 12.7
  Extent = 6.3 (4.4-8.5)", rotation angle = 0
  Source aperture counts = 55.7 +/- 10.4
  Background aperture counts = 32.3
  Rate = 0.003 +/- 0.0005

[Fri Jun 21 19:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:30 2013] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16.arf
[Fri Jun 21 19:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:30 2013] Updating source flux to 5.3e-14
[Fri Jun 21 19:59:35 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 19:59:40 2013] xmm0113891001/analysis//spectral/fullrun_mos2_xmm0113891001_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete