[Fri Jun 21 18:57:51 2013] Detection parameters:
  Position = (384.6, 283.5) = 7 57 37.58 -60 54 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.3 +/- 8.0
  Background counts = 12.7
  Rate = 0.003 +/- 0.0006

[Fri Jun 21 18:57:52 2013] Off-axis axis estimate = 6.34'
[Fri Jun 21 18:58:35 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:35 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Jun 21 18:58:35 2013] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.683
[Fri Jun 21 18:58:35 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.60"
[Fri Jun 21 18:58:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 21 18:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src33.csv
[Fri Jun 21 18:58:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 21 18:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src33.csv
[Fri Jun 21 18:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:37 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 21 18:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 21 18:58:37 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 21 18:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 21 18:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:05 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 15.876905 pixels away
[Fri Jun 21 18:59:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:05 2013] Assessing source extent using major
[Fri Jun 21 18:59:05 2013] Source does appear to be extended
[Fri Jun 21 18:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:34 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:34 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Jun 21 18:59:34 2013] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.683
[Fri Jun 21 18:59:34 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 9.60"
[Fri Jun 21 18:59:35 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun 21 18:59:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src31.csv
[Fri Jun 21 18:59:35 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun 21 18:59:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src31.csv
[Fri Jun 21 18:59:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun 21 18:59:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 21 18:59:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun 21 18:59:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 21 18:59:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 19:00:01 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 15.876905 pixels away
[Fri Jun 21 19:00:01 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:01 2013] Assessing source extent using major
[Fri Jun 21 19:00:01 2013] Source does appear to be extended
[Fri Jun 21 19:00:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:46 2013] XMMSAS src. selection expression = ellipse(33408.100311, 24612.020111, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:46 2013] Not overwriting source region fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src.reg
[Fri Jun 21 19:00:46 2013] Extracting stamp from image fullrun_mos1_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (347, 246) - (422, 321)
[Fri Jun 21 19:00:46 2013] XMMSAS bgd. selection expression = annulus(33408.100311, 24612.020111, 1087.500000, 2175.000000, X, Y) && !ellipse(34701.444733, 27501.767273, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:00:46 2013] Writing fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36.gif
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/events/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0113891001/products/events/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:47 2013] Mean detx,y = (-1954.68, 6078.36) 
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/images/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src.img and ../../xmm0113891001/products/images/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/spectra/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:47 2013] Setting source spectrum file to fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jun 21 19:00:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/lightcurves/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Jun 21 19:15:03 2013] Not generating rmf since there are only 36 counts
[Fri Jun 21 19:15:03 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:21 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:21 2013] Total counts from fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 106.00
[Fri Jun 21 19:59:21 2013] Total counts from fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_bgd.pi.gz = 548.00
[Fri Jun 21 19:59:21 2013] Got source and background scale factors 984920.000000, 9703415.000000
[Fri Jun 21 19:59:21 2013] User source parameters:
  Position = (384.6, 283.5) = 7 57 37.58 -60 54 33.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.4 +/- 11.3
  Background aperture counts = 55.6
  Rate = 0.003 +/- 0.0006

[Fri Jun 21 19:59:21 2013] Updating counts from extracted products
[Fri Jun 21 19:59:21 2013] Set source signif. to 50.38/7.46 = 6.75
[Fri Jun 21 19:59:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:23 2013] Using photon index=1.80, rate=0.00252, arf fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36.arf
[Fri Jun 21 19:59:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:23 2013] Updating source flux to 4.6e-14
[Fri Jun 21 19:59:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:35 2013] xmm0113891001/analysis//spectral/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete