[Fri Jun 21 18:57:51 2013] Detection parameters:
  Position = (259.8, 296.3) = 7 58 51.97 -60 53 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.8 +/- 9.3
  Background counts = 12.5
  Rate = 0.003 +/- 0.0006

[Fri Jun 21 18:57:52 2013] Off-axis axis estimate = 2.80'
[Fri Jun 21 18:58:35 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:35 2013] Initial guess for spatial extent in simple fitting = 7.83"
[Fri Jun 21 18:58:35 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.945
[Fri Jun 21 18:58:35 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.83"
[Fri Jun 21 18:58:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jun 21 18:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src29.csv
[Fri Jun 21 18:58:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jun 21 18:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src29.csv
[Fri Jun 21 18:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:37 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jun 21 18:58:37 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jun 21 18:58:37 2013] Fit fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Jun 21 18:59:05 2013] Spatial fit model total counts = 254.385000, observed total counts = 254.000000
[Fri Jun 21 18:59:05 2013] Offset between fit and detection position for source 34 = 0.354376 pixels
[Fri Jun 21 18:59:05 2013] Warning, changing simple spatial fit ID from 29 to 5
[Fri Jun 21 18:59:05 2013] 251.822000 total counts/ 238.151000 bgd. counts: snr = 0.885878
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.354376 pixels
  Position = (260.0, 296.0) = 7 58 51.88 -60 53 40.7
  Extent = 2.7 (1.9-4.3)", rotation angle = 0
  Source counts = 13.7 +/- 15.9
  Background counts = 238.2
  Rate = 0.0007 +/- 0.0008
  Deleting source due to low Poisson probability