[Fri Jun 21 18:57:49 2013] Detection parameters:
  Position = (399.4, 316.7) = 7 57 28.79 -60 52 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.4 +/- 11.5
  Background counts = 13.5
  Rate = 0.005 +/- 0.0007

[Fri Jun 21 18:57:52 2013] Off-axis axis estimate = 7.44'
[Fri Jun 21 18:58:35 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:35 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Fri Jun 21 18:58:35 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Fri Jun 21 18:58:35 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.15"
[Fri Jun 21 18:58:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jun 21 18:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src14.csv
[Fri Jun 21 18:58:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jun 21 18:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src14.csv
[Fri Jun 21 18:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:37 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jun 21 18:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 21 18:58:37 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jun 21 18:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 21 18:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:05 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.731440 pixels away
[Fri Jun 21 18:59:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:05 2013] Assessing source extent using major
[Fri Jun 21 18:59:05 2013] Source does appear to be extended
[Fri Jun 21 18:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:34 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:34 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Fri Jun 21 18:59:34 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Fri Jun 21 18:59:34 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.15"
[Fri Jun 21 18:59:35 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 21 18:59:35 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 21 18:59:35 2013] Fit fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri Jun 21 18:59:35 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 21 18:59:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jun 21 18:59:36 2013] fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 21 18:59:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jun 21 18:59:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 19:00:01 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 16.342854 pixels away
[Fri Jun 21 19:00:01 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 108.532167 pixels away
[Fri Jun 21 19:00:01 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 19:00:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 19:00:01 2013] Assessing source extent using major
[Fri Jun 21 19:00:01 2013] Source does appear to be extended
[Fri Jun 21 19:00:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:46 2013] XMMSAS src. selection expression = ellipse(34701.444733, 27501.767273, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:46 2013] Not overwriting source region fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src.reg
[Fri Jun 21 19:00:46 2013] Extracting stamp from image fullrun_mos1_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (362, 279) - (437, 354)
[Fri Jun 21 19:00:46 2013] XMMSAS bgd. selection expression = annulus(34701.444733, 27501.767273, 1087.500000, 2175.000000, X, Y) && !ellipse(33408.100311, 24612.020111, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:00:46 2013] Writing fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30.gif
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/events/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0113891001/products/events/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:47 2013] Mean detx,y = (1152.47, 7124.30) 
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/images/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src.img and ../../xmm0113891001/products/images/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/spectra/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:47 2013] Setting source spectrum file to fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jun 21 19:00:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jun 21 19:00:47 2013] ../../xmm0113891001/products/lightcurves/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Jun 21 19:13:33 2013] Not generating rmf since there are only 77 counts
[Fri Jun 21 19:13:33 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:59:18 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:18 2013] Total counts from fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 142.00
[Fri Jun 21 19:59:18 2013] Total counts from fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_bgd.pi.gz = 616.00
[Fri Jun 21 19:59:18 2013] Got source and background scale factors 1185032.000000, 9416669.000000
[Fri Jun 21 19:59:18 2013] User source parameters:
  Position = (399.4, 316.7) = 7 57 28.79 -60 52 10.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 64.5 +/- 12.9
  Background aperture counts = 77.5
  Rate = 0.003 +/- 0.0006

[Fri Jun 21 19:59:18 2013] Updating counts from extracted products
[Fri Jun 21 19:59:18 2013] Set source signif. to 64.48/8.80 = 7.32
[Fri Jun 21 19:59:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:23 2013] Using photon index=1.80, rate=0.00323, arf fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30.arf
[Fri Jun 21 19:59:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:23 2013] Updating source flux to 5e-14
[Fri Jun 21 19:59:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:35 2013] xmm0113891001/analysis//spectral/fullrun_mos1_xmm0113891001_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete