[Tue May 22 10:39:13 2012] Detection parameters:
  Position = (454.0, 293.0) = 16 53 9.36 15 31 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.8 +/- 16.8
  Background counts = 56.1
  Rate = 0.01 +/- 0.002

[Tue May 22 10:39:14 2012] Off-axis axis estimate = 11.29'
[Tue May 22 10:43:04 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:43:04 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Tue May 22 10:43:04 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.839
[Tue May 22 10:43:04 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.07"
[Tue May 22 13:52:25 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 22 13:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_src3.csv
[Tue May 22 13:52:25 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 22 13:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_src3.csv
[Tue May 22 13:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:52:26 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 22 13:52:26 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 22 13:52:26 2012] Fit fullrun_pn_xmm0113071001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 22 14:00:34 2012] Source 4 is offset by -6.453488 and 4.369420 pixels which is larger than
2 X fitted extent = 1.371329 x 1.371329, not incorporating fit results
[Tue May 22 14:00:34 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Tue May 22 14:00:34 2012] Source 4 is offset by 0.260167 and -4.731960 pixels which is larger than
2 X fitted extent = 1.344497 x 1.344497, not incorporating fit results
[Tue May 22 14:00:34 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:00:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:00:34 2012] Assessing source extent using major
[Tue May 22 14:00:34 2012] Source does appear to be extended
[Tue May 22 14:00:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 14:00:34 2012] Source is confused with source 2
[Tue May 22 14:00:46 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Tue May 22 14:00:46 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Tue May 22 14:00:46 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.839
[Tue May 22 14:00:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.07"
[Tue May 22 16:33:22 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 22 16:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_src3.csv
[Tue May 22 16:33:22 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 22 16:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_src3.csv
[Tue May 22 16:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 16:33:22 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 22 16:33:22 2012] fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 22 16:33:22 2012] Fit fullrun_pn_xmm0113071001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 22 16:42:23 2012] Source 4 is offset by -6.453672 and -2.445799 pixels which is larger than
2 X fitted extent = 1.371228 x 1.371228, not incorporating fit results
[Tue May 22 16:42:23 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Tue May 22 16:42:23 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.750114 pixels away
[Tue May 22 16:42:23 2012] Vigneting correction estimate = 1.000000
[Tue May 22 16:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 16:42:23 2012] Assessing source extent using major
[Tue May 22 16:42:23 2012] Source does appear to be extended
[Tue May 22 16:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 16:42:35 2012] XMMSAS src. selection expression = ellipse(39450.904510, 25444.589508, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 22 16:42:35 2012] Writing source region out to fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4_src.reg
[Tue May 22 16:42:35 2012] Extracting stamp from image fullrun_pn_xmm0113071001_pi300-10000_cl_sm2.00.img.gz, (417, 256) - (492, 331)
[Tue May 22 16:42:35 2012] XMMSAS bgd. selection expression = annulus(39450.904510, 25444.589508, 1087.500000, 2175.000000, X, Y) && !ellipse(39057.965485, 24656.029877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37572.529694, 24562.442749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38443.456299, 25680.072021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38515.999664, 24861.407013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37060.940063, 24584.737030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38381.822449, 24130.270355, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 16:42:35 2012] Writing fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4.gif
[Tue May 22 16:44:03 2012] Mean detx,y = (-14560.72, 448.29) 
[Tue May 22 16:44:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 16:44:28 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 16:44:28 2012] Setting source spectrum file to fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 22 16:44:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 22 17:02:38 2012] Not generating rmf since there are only 83 counts
[Tue May 22 17:02:38 2012] rmf not generated due to insufficient counts
[Tue May 22 17:15:16 2012] Updating aperture counts using extracted products
[Tue May 22 17:15:16 2012] Error reading totcts from fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 22 17:15:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 17:15:18 2012] Using photon index=1.80, rate=0.0106, arf fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4.arf
[Tue May 22 17:15:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 17:15:18 2012] Updating source flux to 7.3e-14
[Tue May 22 17:15:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 22 17:15:55 2012] xmm0113071001/analysis//spectral/fullrun_pn_xmm0113071001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete