[Sun Dec 18 10:57:01 2011] Detection parameters:
  Position = (286.4, 336.9) = 16 53 54.40 39 46 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.1 +/- 18.4
  Background counts = 19.7
  Rate = 0.02 +/- 0.003

[Sun Dec 18 10:57:01 2011] Off-axis axis estimate = 2.92'
[Sun Dec 18 12:53:31 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 12:53:31 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Dec 18 12:53:31 2011] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.701
[Sun Dec 18 12:53:31 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.89"
[Sun Dec 18 14:30:06 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Dec 18 14:30:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_src6.csv
[Sun Dec 18 14:30:06 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Dec 18 14:30:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_src6.csv
[Sun Dec 18 14:30:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 14:30:07 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Dec 18 14:30:07 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Dec 18 14:30:07 2011] Fit fullrun_mos2_xmm0113060201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Dec 18 14:30:15 2011] Warning, spatial fit 6 centroid is now closest to src. 4
[Sun Dec 18 14:30:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:30:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:30:15 2011] Assessing source extent using major
[Sun Dec 18 14:30:15 2011] Source does appear to be extended
[Sun Dec 18 14:30:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 17:12:24 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 17:12:24 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Dec 18 17:12:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.701
[Sun Dec 18 17:12:24 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.89"
[Sun Dec 18 17:55:44 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_src6.ximg exists
[Sun Dec 18 17:55:44 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_src6.csv
[Sun Dec 18 17:55:44 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Dec 18 17:55:44 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_src6.csv
[Sun Dec 18 17:55:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 17:55:44 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Dec 18 17:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Dec 18 17:55:44 2011] fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Dec 18 17:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Dec 18 17:55:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113060201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 17:55:50 2011] Source 3 is offset by -2.153034 and 8.499992 pixels which is larger than
2 X fitted extent = 0.607651 x 0.607651, not incorporating fit results
[Sun Dec 18 17:55:50 2011] Source 3 is offset by 5.704254 and 4.164428 pixels which is larger than
2 X fitted extent = 0.658207 x 0.658207, not incorporating fit results
[Sun Dec 18 17:55:50 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 43.899595 pixels away
[Sun Dec 18 17:55:50 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 17:55:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 17:55:50 2011] Assessing source extent using major
[Sun Dec 18 17:55:50 2011] Source does appear to be extended
[Sun Dec 18 17:55:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 19:57:45 2011] XMMSAS src. selection expression = ellipse(24871.658081, 29261.693268, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 19:57:45 2011] Writing source region out to fullrun_mos2_xmm0113060201_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 19:57:45 2011] Extracting stamp from image fullrun_mos2_xmm0113060201_pi300-10000_cl_sm2.00.img.gz, (249, 299) - (324, 374)
[Sun Dec 18 19:57:45 2011] XMMSAS bgd. selection expression = annulus(24871.658081, 29261.693268, 1087.500000, 2175.000000, X, Y) && !ellipse(25373.548400, 27775.335000, 2398.884069, 2398.884069, 0.000000, X, Y) && !ellipse(26212.996000, 28474.988000, 983.968028, 983.968028, 0.000000, X, Y) && !ellipse(25464.626000, 28812.888000, 400.308012, 400.308012, 0.000000, X, Y) && !ellipse(26886.429718, 27723.733032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23594.804000, 27122.724200, 1226.384035, 1226.384035, 0.000000, X, Y) && !ellipse(27308.462555, 28354.238770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.825745, 26785.158936, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 19:57:45 2011] Writing fullrun_mos2_xmm0113060201_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 20:08:04 2011] Mean detx,y = (-780.08, 1009.81) 
[Sun Dec 18 20:08:05 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 20:08:14 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 20:08:14 2011] Setting source spectrum file to fullrun_mos2_xmm0113060201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 20:08:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0113060201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 20:23:14 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 20:23:14 2011] rmf not generated due to insufficient counts
[Sun Dec 18 20:32:18 2011] Updating aperture counts using extracted products
[Sun Dec 18 20:32:18 2011] Error reading totcts from fullrun_mos2_xmm0113060201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 20:32:18 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 20:32:18 2011] Using photon index=1.80, rate=0.0194, arf fullrun_mos2_xmm0113060201_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 20:32:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 20:32:18 2011] Updating source flux to 1.9e-13
[Sun Dec 18 20:32:27 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting