[Sat Sep  1 14:00:38 2012] Detection parameters:
  Position = (265.2, 235.3) = 16 17 51.26 -51 0 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.6 +/- 26.3
  Background counts = 463.2
  Rate = 0.009 +/- 0.0009

[Sat Sep  1 14:00:39 2012] Off-axis axis estimate = 5.17'
[Sat Sep  1 20:40:35 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 20:40:35 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Sat Sep  1 20:40:35 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.945
[Sat Sep  1 20:40:35 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.01"
[Sun Sep  2 02:21:36 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_src63.ximg exists
[Sun Sep  2 02:21:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_src63.csv
[Sun Sep  2 02:21:36 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Sep  2 02:21:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_src63.csv
[Sun Sep  2 02:21:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 02:21:37 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Sep  2 02:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Sep  2 02:21:37 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Sep  2 02:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Sep  2 02:21:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 02:21:59 2012] Spatial fit model total counts = 4945.680000, observed total counts = 3684.000000
[Sun Sep  2 02:21:59 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Sep  2 02:21:59 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 02:21:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 02:21:59 2012] Assessing source extent using major
[Sun Sep  2 02:21:59 2012] Source does appear to be extended
[Sun Sep  2 02:21:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 09:06:47 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 09:06:47 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Sun Sep  2 09:06:47 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.945
[Sun Sep  2 09:06:47 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 9.01"
[Sun Sep  2 17:16:47 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_src61.ximg exists
[Sun Sep  2 17:16:47 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Sep  2 17:16:47 2012] Fit fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_src61 appears to have run properly
[Sun Sep  2 17:16:49 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Sep  2 17:16:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sun Sep  2 17:16:49 2012] fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Sep  2 17:16:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sun Sep  2 17:16:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:17:20 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.506642 pixels away
[Sun Sep  2 17:17:20 2012] Warning, spatial fit 61 centroid is now closest to src. 30
[Sun Sep  2 17:17:20 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:17:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:17:20 2012] Assessing source extent using major
[Sun Sep  2 17:17:20 2012] Source does appear to be extended
[Sun Sep  2 17:17:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 19:32:09 2012] XMMSAS src. selection expression = ellipse(23026.248108, 20424.128235, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep  2 19:32:09 2012] Writing source region out to fullrun_mos2_xmm0113050701_pi300-10000_pass1_cl_src27_src.reg
[Sun Sep  2 19:32:09 2012] Extracting stamp from image fullrun_mos2_xmm0113050701_pi300-10000_cl_sm2.00.img.gz, (228, 198) - (303, 273)
[Sun Sep  2 19:32:09 2012] XMMSAS bgd. selection expression = annulus(23026.248108, 20424.128235, 1087.500000, 2175.000000, X, Y) && !ellipse(25859.341480, 18788.369400, 1493.522443, 1493.522443, 0.000000, X, Y) && !ellipse(25901.824000, 14619.759000, 5373.264155, 5373.264155, 0.000000, X, Y) && !ellipse(24308.992600, 14841.116400, 4266.816123, 4266.816123, 0.000000, X, Y) && !ellipse(22344.120000, 16213.808000, 10427.712300, 10427.712300, 0.000000, X, Y) && !ellipse(25780.658000, 16822.673200, 1630.008047, 1630.008047, 0.000000, X, Y) && !ellipse(25110.942000, 17198.596000, 1656.312048, 1656.312048, 0.000000, X, Y) && !ellipse(24225.084000, 17590.448000, 1792.760052, 1792.760052, 0.000000, X, Y) && !ellipse(29199.660000, 21325.920000, 6245.376180, 6245.376180, 0.000000, X, Y) && !ellipse(24729.014720, 22802.151800, 2053.240059, 860.328025, 349.805000, X, Y) && !ellipse(21263.282000, 16640.964000, 1716.112049, 1716.112049, 0.000000, X, Y) && !ellipse(23232.463400, 21960.600600, 1346.096039, 834.224024, 354.889030, X, Y) && !ellipse(24453.552800, 22804.770400, 886.368026, 886.368026, 0.000000, X, Y) && !ellipse(20837.978940, 18057.064600, 845.664024, 630.452018, 55.660700, X, Y) && !ellipse(24089.660600, 22771.721200, 1280.272037, 1280.272037, 0.000000, X, Y) && !ellipse(24679.001190, 21964.329315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25668.556000, 21346.268000, 1308.232038, 1308.232038, 0.000000, X, Y) && !ellipse(25866.043549, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22522.942000, 22302.575940, 741.816021, 741.816021, 0.000000, X, Y) && !ellipse(21532.760000, 17512.052000, 3076.368089, 2753.800079, 356.836050, X, Y) && !ellipse(21865.490000, 21237.264000, 1414.872041, 1414.872041, 0.000000, X, Y) && !ellipse(26069.437378, 20302.693832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20355.710800, 19662.923800, 825.992024, 825.992024, 0.000000, X, Y) && !ellipse(21323.771637, 20239.177567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.980000, 19764.877800, 1435.184041, 1435.184041, 0.000000, X, Y) && !ellipse(19584.078000, 18440.968000, 1688.520049, 1688.520049, 0.000000, X, Y) && !ellipse(21088.194000, 19018.408000, 1538.184044, 1538.184044, 0.000000, X, Y)
[Sun Sep  2 19:32:09 2012] Writing fullrun_mos2_xmm0113050701_pi300-10000_pass1_cl_src27.gif
[Sun Sep  2 21:26:05 2012] Mean detx,y = (4124.24, -7156.65) 
[Sun Sep  2 21:26:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 21:26:25 2012] grppha failed
[Sun Sep  2 21:26:26 2012] Setting source spectrum file to fullrun_mos2_xmm0113050701_pi300-10000_pass1_cl_src27_src.pi.gz
[Sun Sep  2 21:26:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0113050701_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Sep  2 21:27:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Sep  2 21:27:32 2012] rmf not generated due to insufficient counts
[Sun Sep  2 21:28:11 2012] Updating aperture counts using extracted products
[Sun Sep  2 21:28:11 2012] Error reading totcts from fullrun_mos2_xmm0113050701_pi300-10000_pass1_cl_src27_src.pi.gz
[Sun Sep  2 21:28:11 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 21:28:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Sep  2 21:28:15 2012] xmm0113050701/analysis//spectral/fullrun_mos2_xmm0113050701_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete