[Sat Sep  1 14:00:01 2012] Detection parameters:
  Position = (319.9, 178.0) = 16 17 26.04 -51 5 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2339.7 +/- 70.6
  Background counts = 367.1
  Rate = 0.08 +/- 0.003

[Sat Sep  1 14:00:01 2012] Off-axis axis estimate = 8.87'
[Sat Sep  1 14:03:05 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 14:03:05 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Sep  1 14:03:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sat Sep  1 14:03:05 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 10.86"
[Sat Sep  1 20:40:33 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src72.ximg exists
[Sat Sep  1 20:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src72.csv
[Sat Sep  1 20:40:33 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src72_1.ximg exists
[Sat Sep  1 20:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src72.csv
[Sat Sep  1 20:40:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 20:40:35 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sat Sep  1 20:40:35 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sat Sep  1 20:40:35 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Sun Sep  2 02:21:50 2012] Warning, spatial fit 72 centroid is now closest to src. 75
[Sun Sep  2 02:21:50 2012] Source 72 is offset by 5.603391 and -0.311602 pixels which is larger than
2 X fitted extent = 1.286993 x 1.286993, not incorporating fit results
[Sun Sep  2 02:21:50 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 02:21:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 02:21:50 2012] Assessing source extent using major
[Sun Sep  2 02:21:50 2012] Source does appear to be extended
[Sun Sep  2 02:21:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 02:21:50 2012] Source is confused with source 62
[Sun Sep  2 02:21:50 2012] Source is confused with source 68
[Sun Sep  2 02:21:50 2012] Source is confused with source 75
[Sun Sep  2 02:22:10 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 02:22:10 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sun Sep  2 02:22:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sun Sep  2 02:22:10 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 10.86"
[Sun Sep  2 09:06:45 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src66.ximg exists
[Sun Sep  2 09:06:45 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src66_1.ximg exists
[Sun Sep  2 09:06:45 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src66 appears to have run properly
[Sun Sep  2 09:06:47 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Sun Sep  2 09:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sun Sep  2 09:06:47 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Sun Sep  2 09:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sun Sep  2 09:06:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:17:08 2012] Spatial fit model total counts = 45145.900000, observed total counts = 45142.000000
[Sun Sep  2 17:17:08 2012] Offset between fit and detection position for source 72 = 4.079251 pixels
[Sun Sep  2 17:17:08 2012] Warning, changing simple spatial fit ID from 66 to 53
[Sun Sep  2 17:17:08 2012] 44958.950000 total counts/ 35248.300000 bgd. counts: snr = 51.722465
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 4.079251 pixels
  Position = (322.6, 181.0) = 16 17 24.78 -51 5 0.8
  Extent = 40.8 (40.8-81.7)", rotation angle = 0
  Source counts = 9710.6 +/- 212.0
  Background counts = 35248.3
  Rate = 0.4 +/- 0.008
[Sun Sep  2 17:17:08 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:17:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:17:08 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:17:08 2012] Source does appear to be extended
[Sun Sep  2 17:17:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:17:37 2012] Counts = 9710.650000, rescaling region sizes by 2.000000
[Sun Sep  2 17:17:37 2012] XMMSAS src. selection expression = ellipse(28020.222000, 15699.866000, 4901.904141, 4901.904141, 0.000000, X, Y)
[Sun Sep  2 17:17:37 2012] Writing source region out to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src72_src.reg
[Sun Sep  2 17:17:37 2012] Extracting stamp from image fullrun_mos1_xmm0113050701_pi300-10000_cl_sm2.00.img.gz, (41, 0) - (595, 463)
[Sun Sep  2 17:17:37 2012] XMMSAS bgd. selection expression = annulus(28020.222000, 15699.866000, 16339.680470, 32679.360940, X, Y) && !ellipse(26031.096000, 19305.956000, 1431.152041, 1431.152041, 0.000000, X, Y) && !ellipse(22496.699860, 41115.963654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.195200, 37025.177600, 1823.888052, 1823.888052, 0.000000, X, Y) && !ellipse(28232.253448, 31330.680603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.142400, 27446.465800, 425.012812, 425.012812, 0.000000, X, Y) && !ellipse(27967.152000, 26288.500000, 1223.448035, 1223.448035, 0.000000, X, Y) && !ellipse(23566.910200, 23881.972000, 1223.448035, 821.072024, 77.019000, X, Y) && !ellipse(25866.343567, 23002.663483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.442000, 22724.544000, 1305.360038, 919.264026, 213.216000, X, Y) && !ellipse(26292.264000, 22842.064200, 1222.792035, 1222.792035, 0.000000, X, Y) && !ellipse(24699.574765, 22803.426712, 1300.328037, 839.696022, 356.383114, X, Y) && !ellipse(24090.051000, 22777.287400, 1278.880037, 1278.880037, 0.000000, X, Y) && !ellipse(22548.580000, 22101.230000, 1414.616041, 1414.616041, 0.000000, X, Y) && !ellipse(28854.856000, 21987.712000, 609.976818, 609.976818, 0.000000, X, Y) && !ellipse(28127.997515, 22538.073578, 1515.744044, 1334.333658, 0.000000, X, Y) && !ellipse(24902.978000, 22450.932000, 1300.328037, 1300.328037, 0.000000, X, Y) && !ellipse(24979.338000, 22873.772000, 882.688025, 882.688025, 0.000000, X, Y) && !ellipse(25747.039800, 21213.144000, 897.864026, 897.864026, 0.000000, X, Y) && !ellipse(29130.952200, 21314.138000, 1078.080031, 1078.080031, 0.000000, X, Y) && !ellipse(23183.794000, 21903.706000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(29767.999390, 20757.426010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26837.076000, 21306.464200, 1357.368039, 1357.368039, 0.000000, X, Y) && !ellipse(22399.812000, 21713.102000, 2697.424078, 2697.424078, 0.000000, X, Y) && !ellipse(21679.334000, 21180.656000, 1414.616041, 1414.616041, 0.000000, X, Y) && !ellipse(25932.905151, 20302.048660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22975.224200, 20253.918000, 991.904029, 991.904029, 0.000000, X, Y) && !ellipse(28894.492000, 20289.486600, 760.388822, 760.388822, 0.000000, X, Y) && !ellipse(29779.216380, 20227.494000, 1300.328037, 903.368026, 196.889000, X, Y) && !ellipse(28191.868000, 20374.128000, 852.192025, 852.192025, 0.000000, X, Y) && !ellipse(25541.080000, 20178.822000, 1431.152041, 1431.152041, 0.000000, X, Y) && !ellipse(21032.078000, 20459.236000, 1165.824034, 370.828011, 4.291250, X, Y) && !ellipse(21849.438800, 20236.788800, 710.426420, 710.426420, 0.000000, X, Y) && !ellipse(24788.363800, 19802.764400, 1003.064029, 1003.064029, 0.000000, X, Y) && !ellipse(30903.571350, 19355.121841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.792000, 19340.486800, 7384.008212, 7384.008212, 0.000000, X, Y) && !ellipse(20219.714874, 19605.613235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30278.950000, 19020.068000, 624.897618, 624.897618, 0.000000, X, Y) && !ellipse(21169.145386, 18740.313965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.607651, 18753.123154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.573000, 19314.953360, 1479.928043, 1479.928043, 0.000000, X, Y) && !ellipse(28044.282380, 18794.597800, 834.712024, 834.712024, 0.000000, X, Y) && !ellipse(19429.993200, 18398.230000, 1438.944041, 817.688024, 48.789000, X, Y) && !ellipse(29383.824615, 17696.000671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20946.213196, 17957.203781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29960.279266, 17785.053009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.462280, 19352.642044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28740.706000, 17484.612000, 759.523222, 759.523222, 0.000000, X, Y) && !ellipse(29942.328613, 17353.845718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23945.443146, 17088.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30405.979140, 17179.425800, 514.111215, 514.111215, 0.000000, X, Y) && !ellipse(29588.748000, 17025.538000, 1633.968047, 1633.968047, 0.000000, X, Y) && !ellipse(27315.434000, 16975.636000, 1643.704047, 1643.704047, 0.000000, X, Y) && !ellipse(20060.154251, 17611.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.922000, 17026.240000, 747.417622, 747.417622, 0.000000, X, Y) && !ellipse(27200.160000, 16119.267200, 1707.448049, 1707.448049, 350.898000, X, Y) && !ellipse(21161.723800, 16593.684000, 766.296822, 766.296822, 0.000000, X, Y) && !ellipse(24734.950623, 16219.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.247406, 16040.388123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22384.215600, 16730.508000, 1701.640049, 1701.640049, 0.000000, X, Y) && !ellipse(28735.737274, 15783.191452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.416000, 15423.902000, 1732.320050, 1732.320050, 0.000000, X, Y) && !ellipse(22633.237800, 15508.522000, 1756.656051, 846.312024, 39.510000, X, Y) && !ellipse(28391.374000, 14907.000000, 1577.168045, 1577.168045, 0.000000, X, Y) && !ellipse(24602.410000, 15249.352000, 1687.992049, 1687.776049, 358.920000, X, Y) && !ellipse(28789.873322, 14913.697235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24485.552000, 14689.364000, 5334.456153, 5334.456153, 0.000000, X, Y) && !ellipse(26394.532440, 14481.733261, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 17:17:37 2012] Writing fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src72.gif
[Sun Sep  2 19:03:22 2012] Mean detx,y = (-10653.26, -620.01) 
[Sun Sep  2 19:03:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 19:09:43 2012] grppha failed
[Sun Sep  2 19:09:43 2012] Setting source spectrum file to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src72_src.pi.gz
[Sun Sep  2 19:09:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Sun Sep  2 21:28:09 2012] Updating aperture counts using extracted products
[Sun Sep  2 21:28:10 2012] Error reading totcts from fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src72_src.pi.gz
[Sun Sep  2 21:28:10 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 21:28:13 2012] Flag b found in src. 72 procflags, skipping spectral fitting
[Sun Sep  2 21:28:13 2012] Flag c found in src. 72 procflags, skipping spectral fitting
[Sun Sep  2 21:28:13 2012] Source 72 has no response, skipping
[Sun Sep  2 21:28:14 2012] xmm0113050701/analysis//spectral/fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete