[Sat Sep  1 14:00:01 2012] Detection parameters:
  Position = (331.0, 201.9) = 16 17 20.94 -51 3 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 846.4 +/- 48.2
  Background counts = 395.5
  Rate = 0.06 +/- 0.003

[Sat Sep  1 14:00:01 2012] Off-axis axis estimate = 7.38'
[Sat Sep  1 14:03:05 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 14:03:05 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sat Sep  1 14:03:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.127
[Sat Sep  1 14:03:05 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 10.12"
[Sat Sep  1 20:40:32 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src52.ximg exists
[Sat Sep  1 20:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src52.csv
[Sat Sep  1 20:40:32 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src52_1.ximg exists
[Sat Sep  1 20:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src52.csv
[Sat Sep  1 20:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 20:40:34 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sat Sep  1 20:40:34 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sat Sep  1 20:40:34 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Sun Sep  2 02:21:50 2012] Spatial fit model total counts = 10466.500000, observed total counts = 10479.000000
[Sun Sep  2 02:21:50 2012] Offset between fit and detection position for source 52 = 0.416921 pixels
[Sun Sep  2 02:21:50 2012] Warning, changing simple spatial fit ID from 52 to 47
[Sun Sep  2 02:21:50 2012] 10620.207000 total counts/ 9806.230000 bgd. counts: snr = 8.219797
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.416921 pixels
  Position = (330.9, 201.5) = 16 17 20.97 -51 3 31.6
  Extent = 9.5 (8.5-11.0)", rotation angle = 0
  Source counts = 814.0 +/- 103.1
  Background counts = 9806.2
  Rate = 0.03 +/- 0.004
[Sun Sep  2 02:21:50 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 02:21:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 02:21:50 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 02:21:50 2012] Source does appear to be extended
[Sun Sep  2 02:21:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 02:21:50 2012] Source is confused with source 57
[Sun Sep  2 02:22:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 02:22:10 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Sun Sep  2 02:22:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.042
[Sun Sep  2 02:22:10 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 9.49"
[Sun Sep  2 09:06:45 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src48.ximg exists
[Sun Sep  2 09:06:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src48.csv
[Sun Sep  2 09:06:45 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src48_1.ximg exists
[Sun Sep  2 09:06:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src48.csv
[Sun Sep  2 09:06:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 09:06:46 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sun Sep  2 09:06:46 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sun Sep  2 09:06:46 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sun Sep  2 17:17:08 2012] Warning, spatial fit 48 centroid is now closest to src. 47
[Sun Sep  2 17:17:08 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:17:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:17:08 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:17:08 2012] Source does appear to be extended
[Sun Sep  2 17:17:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:17:36 2012] XMMSAS src. selection expression = ellipse(28740.706000, 17484.612000, 569.642416, 569.642416, 0.000000, X, Y)
[Sun Sep  2 17:17:36 2012] Writing source region out to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src52_src.reg
[Sun Sep  2 17:17:36 2012] Extracting stamp from image fullrun_mos1_xmm0113050701_pi300-10000_cl_sm2.00.img.gz, (298, 169) - (364, 234)
[Sun Sep  2 17:17:36 2012] XMMSAS bgd. selection expression = annulus(28740.706000, 17484.612000, 949.404027, 1898.808055, X, Y) && !ellipse(26031.096000, 19305.956000, 1431.152041, 1431.152041, 0.000000, X, Y) && !ellipse(29779.216380, 20227.494000, 1300.328037, 903.368026, 196.889000, X, Y) && !ellipse(25541.080000, 20178.822000, 1431.152041, 1431.152041, 0.000000, X, Y) && !ellipse(30903.571350, 19355.121841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.792000, 19340.486800, 7384.008212, 7384.008212, 0.000000, X, Y) && !ellipse(30278.950000, 19020.068000, 624.897618, 624.897618, 0.000000, X, Y) && !ellipse(27287.573000, 19314.953360, 1479.928043, 1479.928043, 0.000000, X, Y) && !ellipse(28044.282380, 18794.597800, 834.712024, 834.712024, 0.000000, X, Y) && !ellipse(29383.824615, 17696.000671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29960.279266, 17785.053009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.462280, 19352.642044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29942.328613, 17353.845718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30405.979140, 17179.425800, 514.111215, 514.111215, 0.000000, X, Y) && !ellipse(29588.748000, 17025.538000, 1633.968047, 1633.968047, 0.000000, X, Y) && !ellipse(27315.434000, 16975.636000, 1643.704047, 1643.704047, 0.000000, X, Y) && !ellipse(27200.160000, 16119.267200, 1707.448049, 1707.448049, 350.898000, X, Y) && !ellipse(28735.737274, 15783.191452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28020.222000, 15699.866000, 3267.936094, 3267.936094, 0.000000, X, Y) && !ellipse(28391.374000, 14907.000000, 1577.168045, 1577.168045, 0.000000, X, Y) && !ellipse(28789.873322, 14913.697235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24485.552000, 14689.364000, 5334.456153, 5334.456153, 0.000000, X, Y)
[Sun Sep  2 17:17:36 2012] Writing fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src52.gif
[Sun Sep  2 18:41:02 2012] Mean detx,y = (-9882.15, 1306.42) 
[Sun Sep  2 18:41:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 18:41:18 2012] grppha failed
[Sun Sep  2 18:41:18 2012] Setting source spectrum file to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src52_src.pi.gz
[Sun Sep  2 18:41:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun Sep  2 21:28:09 2012] Updating aperture counts using extracted products
[Sun Sep  2 21:28:09 2012] Error reading totcts from fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src52_src.pi.gz
[Sun Sep  2 21:28:10 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 21:28:13 2012] Flag c found in src. 52 procflags, skipping spectral fitting
[Sun Sep  2 21:28:13 2012] Source 52 has no response, skipping
[Sun Sep  2 21:28:14 2012] xmm0113050701/analysis//spectral/fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete