[Sat Sep  1 14:00:00 2012] Detection parameters:
  Position = (288.0, 262.9) = 16 17 40.74 -50 59 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2281.7 +/- 66.6
  Background counts = 204.8
  Rate = 0.1 +/- 0.003

[Sat Sep  1 14:00:01 2012] Off-axis axis estimate = 2.68'
[Sat Sep  1 14:03:05 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 14:03:05 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sat Sep  1 14:03:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765
[Sat Sep  1 14:03:05 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.77"
[Sat Sep  1 20:40:31 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src21.ximg exists
[Sat Sep  1 20:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src21.csv
[Sat Sep  1 20:40:32 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Sep  1 20:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src21.csv
[Sat Sep  1 20:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 20:40:33 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Sep  1 20:40:33 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Sep  1 20:40:33 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Sep  2 02:21:50 2012] Source 21 is offset by -0.181762 and -6.758958 pixels which is larger than
2 X fitted extent = 0.900805 x 0.900805, not incorporating fit results
[Sun Sep  2 02:21:50 2012] Spatial fit model total counts = 9496.110000, observed total counts = 9509.000000
[Sun Sep  2 02:21:50 2012] Offset between fit and detection position for source 21 = 4.661380 pixels
[Sun Sep  2 02:21:50 2012] Warning, changing simple spatial fit ID from 21 to 20
[Sun Sep  2 02:21:50 2012] 9456.186000 total counts/ 8541.760000 bgd. counts: snr = 9.894068
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 4.661380 pixels
  Position = (286.7, 258.4) = 16 17 41.35 -50 59 24.1
  Extent = 16.3 (16.2-32.5)", rotation angle = 0
  Source counts = 914.4 +/- 97.2
  Background counts = 8541.8
  Rate = 0.04 +/- 0.004
[Sun Sep  2 02:21:50 2012] Spatial fit model total counts = 9573.110000, observed total counts = 9565.000000
[Sun Sep  2 02:21:50 2012] Offset between fit and detection position for source 21 = 3.633661 pixels
[Sun Sep  2 02:21:50 2012] Warning, changing simple spatial fit ID from 20 to 21
[Sun Sep  2 02:21:50 2012] 9219.700000 total counts/ 6634.760000 bgd. counts: snr = 31.734953
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.633661 pixels
  Position = (285.4, 261.8) = 16 17 41.94 -50 59 9.3
  Extent = 15.5 (15.5-31.1)", rotation angle = 0
  Source counts = 2584.9 +/- 96.0
  Background counts = 6634.8
  Rate = 0.1 +/- 0.004
[Sun Sep  2 02:21:50 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 02:21:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 02:21:50 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 02:21:50 2012] Source does appear to be extended
[Sun Sep  2 02:21:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 02:21:50 2012] Source is confused with source 14
[Sun Sep  2 02:22:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 02:22:10 2012] Initial guess for spatial extent in simple fitting = 15.54"
[Sun Sep  2 02:22:10 2012] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.085
[Sun Sep  2 02:22:10 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 15.54"
[Sun Sep  2 09:06:45 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src18.ximg exists
[Sun Sep  2 09:06:45 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Sep  2 09:06:45 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_src18 appears to have run properly
[Sun Sep  2 09:06:46 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Sep  2 09:06:46 2012] fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Sep  2 09:06:46 2012] Fit fullrun_mos1_xmm0113050701_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Sep  2 17:17:07 2012] Spatial fit model total counts = 8432.580000, observed total counts = 8429.000000
[Sun Sep  2 17:17:07 2012] Offset between fit and detection position for source 21 = 2.769125 pixels
[Sun Sep  2 17:17:07 2012] Warning, changing simple spatial fit ID from 18 to 11
[Sun Sep  2 17:17:07 2012] 8033.724000 total counts/ 7188.970000 bgd. counts: snr = 9.963156
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.769125 pixels
  Position = (287.7, 263.5) = 16 17 40.91 -50 59 2.2
  Extent = 11.0 (9.0-13.1)", rotation angle = 0
  Source counts = 844.8 +/- 89.6
  Background counts = 7189.0
  Rate = 0.03 +/- 0.004
[Sun Sep  2 17:17:08 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:17:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:17:08 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:17:08 2012] Source does appear to be extended
[Sun Sep  2 17:17:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:17:34 2012] XMMSAS src. selection expression = ellipse(24979.338000, 22873.772000, 662.016019, 662.016019, 0.000000, X, Y)
[Sun Sep  2 17:17:34 2012] Writing source region out to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src21_src.reg
[Sun Sep  2 17:17:34 2012] Extracting stamp from image fullrun_mos1_xmm0113050701_pi300-10000_cl_sm2.00.img.gz, (250, 225) - (326, 302)
[Sun Sep  2 17:17:34 2012] XMMSAS bgd. selection expression = annulus(24979.338000, 22873.772000, 1103.360032, 2206.720063, X, Y) && !ellipse(26031.096000, 19305.956000, 1431.152041, 1431.152041, 0.000000, X, Y) && !ellipse(27967.152000, 26288.500000, 1223.448035, 1223.448035, 0.000000, X, Y) && !ellipse(23566.910200, 23881.972000, 1223.448035, 821.072024, 77.019000, X, Y) && !ellipse(25866.343567, 23002.663483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.442000, 22724.544000, 1305.360038, 919.264026, 213.216000, X, Y) && !ellipse(26292.264000, 22842.064200, 1222.792035, 1222.792035, 0.000000, X, Y) && !ellipse(24699.574765, 22803.426712, 1300.328037, 839.696022, 356.383114, X, Y) && !ellipse(24090.051000, 22777.287400, 1278.880037, 1278.880037, 0.000000, X, Y) && !ellipse(22548.580000, 22101.230000, 1414.616041, 1414.616041, 0.000000, X, Y) && !ellipse(28127.997515, 22538.073578, 1515.744044, 1334.333658, 0.000000, X, Y) && !ellipse(24902.978000, 22450.932000, 1300.328037, 1300.328037, 0.000000, X, Y) && !ellipse(25747.039800, 21213.144000, 897.864026, 897.864026, 0.000000, X, Y) && !ellipse(23183.794000, 21903.706000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(26837.076000, 21306.464200, 1357.368039, 1357.368039, 0.000000, X, Y) && !ellipse(22399.812000, 21713.102000, 2697.424078, 2697.424078, 0.000000, X, Y) && !ellipse(21679.334000, 21180.656000, 1414.616041, 1414.616041, 0.000000, X, Y) && !ellipse(25932.905151, 20302.048660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22975.224200, 20253.918000, 991.904029, 991.904029, 0.000000, X, Y) && !ellipse(25541.080000, 20178.822000, 1431.152041, 1431.152041, 0.000000, X, Y) && !ellipse(24788.363800, 19802.764400, 1003.064029, 1003.064029, 0.000000, X, Y) && !ellipse(26810.792000, 19340.486800, 7384.008212, 7384.008212, 0.000000, X, Y) && !ellipse(27287.573000, 19314.953360, 1479.928043, 1479.928043, 0.000000, X, Y)
[Sun Sep  2 17:17:34 2012] Writing fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src21.gif
[Sun Sep  2 17:51:26 2012] Mean detx,y = (-4501.77, -2357.11) 
[Sun Sep  2 17:51:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 17:51:42 2012] grppha failed
[Sun Sep  2 17:51:42 2012] Setting source spectrum file to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src21_src.pi.gz
[Sun Sep  2 17:51:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Sep  2 21:28:09 2012] Updating aperture counts using extracted products
[Sun Sep  2 21:28:09 2012] Error reading totcts from fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src21_src.pi.gz
[Sun Sep  2 21:28:10 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 21:28:13 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Sun Sep  2 21:28:13 2012] Flag c found in src. 21 procflags, skipping spectral fitting
[Sun Sep  2 21:28:13 2012] Source 21 has no response, skipping
[Sun Sep  2 21:28:14 2012] xmm0113050701/analysis//spectral/fullrun_mos1_xmm0113050701_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete