[Sat Jun 30 10:13:07 2012] Detection parameters:
  Position = (209.3, 185.0) = 18 11 52.99 -19 32 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.2 +/- 14.1
  Background counts = 23.3
  Rate = 0.007 +/- 0.001

[Sat Jun 30 10:13:07 2012] Off-axis axis estimate = 10.46'
[Sat Jun 30 11:29:02 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 11:29:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 30 11:29:02 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Sat Jun 30 11:29:02 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Sat Jun 30 11:29:02 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.66"
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src25.csv
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src25.csv
[Sat Jun 30 13:12:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun 30 13:12:10 2012] Fit fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jun 30 13:12:19 2012] Spatial fit model total counts = 256.148000, observed total counts = 256.000000
[Sat Jun 30 13:12:19 2012] Offset between fit and detection position for source 32 = 0.452059 pixels
[Sat Jun 30 13:12:19 2012] 256.415500 total counts/ 196.631000 bgd. counts: snr = 4.263464
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.452059 pixels
  Position = (209.8, 184.9) = 18 11 52.85 -19 32 12.1
  Extent = 5.4 (4.2-7.2)", rotation angle = 0
  Source counts = 59.8 +/- 16.0
  Background counts = 196.6
  Rate = 0.002 +/- 0.0006
[Sat Jun 30 13:12:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 13:12:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 13:12:19 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 13:12:19 2012] Source does appear to be extended
[Sat Jun 30 13:12:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 13:12:19 2012] Deleting source due to low Poisson probability 0.8