[Sat Jun 30 10:13:07 2012] Detection parameters:
  Position = (197.5, 224.0) = 18 11 56.62 -19 29 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.3 +/- 19.8
  Background counts = 25.7
  Rate = 0.01 +/- 0.001

[Sat Jun 30 10:13:07 2012] Off-axis axis estimate = 9.09'
[Sat Jun 30 11:29:02 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 11:29:02 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Sat Jun 30 11:29:02 2012] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.149
[Sat Jun 30 11:29:02 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.98"
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src22.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src22.csv
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src22.csv
[Sat Jun 30 13:12:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Jun 30 13:12:10 2012] Fit fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Jun 30 13:12:19 2012] Warning, spatial fit 22 centroid is now closest to src. 30
[Sat Jun 30 13:12:19 2012] Source 31 is offset by 2.757621 and 1.193220 pixels which is larger than
2 X fitted extent = 1.273761 x 5.576184, not incorporating fit results
[Sat Jun 30 13:12:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 13:12:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 13:12:19 2012] Assessing source extent using major
[Sat Jun 30 13:12:19 2012] Source does appear to be extended
[Sat Jun 30 13:12:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 14:22:24 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 14:22:24 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Sat Jun 30 14:22:24 2012] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.149
[Sat Jun 30 14:22:24 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.98"
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src21.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src21.csv
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src21.csv
[Sat Jun 30 15:42:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Jun 30 15:42:58 2012] Fit fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Jun 30 15:43:06 2012] Spatial fit model total counts = 376.999000, observed total counts = 377.000000
[Sat Jun 30 15:43:06 2012] Offset between fit and detection position for source 31 = 0.106593 pixels
[Sat Jun 30 15:43:06 2012] 379.698000 total counts/ 237.958000 bgd. counts: snr = 9.188450
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.106593 pixels
  Position = (197.5, 224.1) = 18 11 56.64 -19 29 21.6
  Extent = 4.9 (3.9-5.9)", rotation angle = 0
  Source counts = 141.7 +/- 19.5
  Background counts = 238.0
  Rate = 0.005 +/- 0.0008
[Sat Jun 30 15:43:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 15:43:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 15:43:06 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 15:43:06 2012] Source does appear to be extended
[Sat Jun 30 15:43:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 20:21:19 2012] XMMSAS src. selection expression = ellipse(17129.752000, 19448.454200, 295.150208, 295.150208, 0.000000, X, Y)
[Sat Jun 30 20:21:19 2012] Writing source region out to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun 30 20:21:19 2012] Extracting stamp from image fullrun_mos2_xmm0113050401_pi300-10000_cl_sm2.00.img.gz, (180, 207) - (214, 241)
[Sat Jun 30 20:21:19 2012] XMMSAS bgd. selection expression = annulus(17129.752000, 19448.454200, 491.917014, 983.834028, X, Y)
[Sat Jun 30 20:21:19 2012] Writing fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src31.gif
[Sat Jun 30 20:54:42 2012] Mean detx,y = (-7756.94, 4613.85) 
[Sat Jun 30 20:54:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 30 20:54:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 30 20:54:47 2012] Setting source spectrum file to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun 30 20:54:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun 30 23:10:38 2012] Updating aperture counts using extracted products
[Sat Jun 30 23:10:38 2012] Error reading totcts from fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun 30 23:10:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 23:10:39 2012] Using photon index=1.80, rate=0.00549, arf fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src31.arf
[Sat Jun 30 23:10:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 30 23:10:39 2012] Updating source flux to 1.1e-13
[Sat Jun 30 23:12:55 2012] Flag b found in src. 31 procflags, skipping spectral fitting