[Sat Jun 30 10:13:07 2012] Detection parameters:
  Position = (258.9, 294.5) = 18 11 37.73 -19 24 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.6 +/- 19.9
  Background counts = 78.4
  Rate = 0.006 +/- 0.0009

[Sat Jun 30 10:13:07 2012] Off-axis axis estimate = 2.88'
[Sat Jun 30 11:29:02 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 11:29:02 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sat Jun 30 11:29:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.750
[Sat Jun 30 11:29:02 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.87"
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src27.csv
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src27.csv
[Sat Jun 30 13:12:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun 30 13:12:10 2012] Fit fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun 30 13:12:19 2012] Warning, spatial fit 27 centroid is now closest to src. 14
[Sat Jun 30 13:12:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 13:12:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 13:12:19 2012] Assessing source extent using major
[Sat Jun 30 13:12:19 2012] Source does appear to be extended
[Sat Jun 30 13:12:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 14:22:24 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 14:22:24 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sat Jun 30 14:22:24 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.750
[Sat Jun 30 14:22:24 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.87"
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src25.csv
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src25.csv
[Sat Jun 30 15:42:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jun 30 15:42:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 15:43:06 2012] Spatial fit model total counts = 9218.160000, observed total counts = 9265.000000
[Sat Jun 30 15:43:06 2012] Offset between fit and detection position for source 26 = 9.935945 pixels
[Sat Jun 30 15:43:06 2012] Warning, changing simple spatial fit ID from 25 to 16
[Sat Jun 30 15:43:06 2012] 9050.475000 total counts/ 8575.800000 bgd. counts: snr = 5.125769
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 9.935945 pixels
  Position = (249.3, 291.9) = 18 11 40.68 -19 24 27.0
  Extent = 21.3 (19.1-30.4)", rotation angle = 0
  Source counts = 474.7 +/- 95.1
  Background counts = 8575.8
  Rate = 0.02 +/- 0.004
[Sat Jun 30 15:43:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 15:43:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 15:43:06 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 15:43:06 2012] Source does appear to be extended
[Sat Jun 30 15:43:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 20:21:19 2012] XMMSAS src. selection expression = ellipse(21640.196000, 25343.688000, 1278.432037, 1278.432037, 0.000000, X, Y)
[Sat Jun 30 20:21:19 2012] Writing source region out to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src26_src.reg
[Sat Jun 30 20:21:19 2012] Extracting stamp from image fullrun_mos2_xmm0113050401_pi300-10000_cl_sm2.00.img.gz, (176, 218) - (323, 365)
[Sat Jun 30 20:21:19 2012] XMMSAS bgd. selection expression = annulus(21640.196000, 25343.688000, 2130.720061, 4261.440123, X, Y) && !ellipse(24884.460000, 24172.886000, 383.362411, 383.362411, 0.000000, X, Y) && !ellipse(23183.432553, 23140.672966, 1283.192037, 792.864255, 37.254477, X, Y) && !ellipse(23580.436200, 25786.565600, 877.032025, 877.032025, 0.000000, X, Y) && !ellipse(25866.169600, 22328.710040, 1417.072041, 1417.072041, 0.000000, X, Y) && !ellipse(24672.607880, 22305.102325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.552673, 23614.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.841095, 24065.153107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26098.270000, 26161.346000, 1235.864036, 1235.864036, 0.000000, X, Y) && !ellipse(24527.093689, 26138.003510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.932000, 24503.236934, 1103.136032, 839.334551, 121.202119, X, Y) && !ellipse(26649.232000, 25140.430000, 1066.392031, 1066.392031, 0.000000, X, Y) && !ellipse(22710.688000, 24522.966000, 1215.400035, 1215.400035, 0.000000, X, Y) && !ellipse(25734.608000, 24707.498000, 1119.008032, 1119.008032, 0.000000, X, Y) && !ellipse(26270.366000, 25744.430000, 2120.608061, 2120.608061, 0.000000, X, Y) && !ellipse(23786.385651, 24740.207581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.041200, 23934.692000, 1551.832045, 1551.832045, 0.000000, X, Y) && !ellipse(21290.614304, 20819.434219, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 30 20:21:19 2012] Writing fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src26.gif
[Sat Jun 30 20:55:16 2012] Mean detx,y = (-2727.48, -942.64) 
[Sat Jun 30 20:55:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 30 20:55:32 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 30 20:55:32 2012] Setting source spectrum file to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jun 30 20:55:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Jun 30 23:10:39 2012] Updating aperture counts using extracted products
[Sat Jun 30 23:10:39 2012] Error reading totcts from fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jun 30 23:10:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 23:10:39 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src26.arf
[Sat Jun 30 23:10:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 30 23:10:39 2012] Updating source flux to 2.1e-13