[Sat Jun 30 10:13:07 2012] Detection parameters:
  Position = (303.2, 294.0) = 18 11 24.10 -19 24 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 832.4 +/- 41.9
  Background counts = 96.7
  Rate = 0.03 +/- 0.002

[Sat Jun 30 10:13:07 2012] Off-axis axis estimate = 0.47'
[Sat Jun 30 11:29:02 2012] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 11:29:02 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Sat Jun 30 11:29:02 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969
[Sat Jun 30 11:29:02 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 6.66"
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src19.csv
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 30 13:12:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src19.csv
[Sat Jun 30 13:12:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 30 13:12:10 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 30 13:12:10 2012] Fit fullrun_mos2_xmm0113050401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun 30 13:12:19 2012] Spatial fit model total counts = 5755.990000, observed total counts = 5753.000000
[Sat Jun 30 13:12:19 2012] Offset between fit and detection position for source 12 = 1.203304 pixels
[Sat Jun 30 13:12:19 2012] Warning, changing simple spatial fit ID from 19 to 16
[Sat Jun 30 13:12:19 2012] 5564.953000 total counts/ 4870.830000 bgd. counts: snr = 9.945691
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.203304 pixels
  Position = (304.0, 293.1) = 18 11 23.86 -19 24 21.7
  Extent = 13.8 (13.7-27.6)", rotation angle = 0
  Source counts = 694.1 +/- 74.6
  Background counts = 4870.8
  Rate = 0.03 +/- 0.003
[Sat Jun 30 13:12:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 13:12:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 13:12:19 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 13:12:19 2012] Source does appear to be extended
[Sat Jun 30 13:12:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 13:12:19 2012] Source is confused with source 21
[Sat Jun 30 14:22:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 30 14:22:24 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Sat Jun 30 14:22:24 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.188
[Sat Jun 30 14:22:24 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.79"
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src18.csv
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun 30 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src18.csv
[Sat Jun 30 15:42:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 30 15:42:58 2012] fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 30 15:42:58 2012] Fit fullrun_mos2_xmm0113050401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun 30 15:43:06 2012] Spatial fit model total counts = 7441.740000, observed total counts = 7444.000000
[Sat Jun 30 15:43:06 2012] Offset between fit and detection position for source 12 = 3.699748 pixels
[Sat Jun 30 15:43:06 2012] Warning, changing simple spatial fit ID from 18 to 15
[Sat Jun 30 15:43:06 2012] 7029.280000 total counts/ 4498.500000 bgd. counts: snr = 37.732930
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.699748 pixels
  Position = (302.5, 296.5) = 18 11 24.32 -19 24 7.0
  Extent = 26.5 (26.2-26.7)", rotation angle = 0
  Source counts = 2530.8 +/- 83.8
  Background counts = 4498.5
  Rate = 0.1 +/- 0.003
[Sat Jun 30 15:43:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 15:43:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 15:43:06 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 15:43:06 2012] Source does appear to be extended
[Sat Jun 30 15:43:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 20:21:19 2012] Counts = 2530.780000, rescaling region sizes by 2.000000
[Sat Jun 30 20:21:19 2012] XMMSAS src. selection expression = ellipse(26270.366000, 25744.430000, 3180.912092, 3180.912092, 0.000000, X, Y)
[Sat Jun 30 20:21:19 2012] Writing source region out to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 30 20:21:19 2012] Extracting stamp from image fullrun_mos2_xmm0113050401_pi300-10000_cl_sm2.00.img.gz, (120, 114) - (485, 479)
[Sat Jun 30 20:21:19 2012] XMMSAS bgd. selection expression = annulus(26270.366000, 25744.430000, 10603.040305, 21206.080610, X, Y) && !ellipse(24884.460000, 24172.886000, 383.362411, 383.362411, 0.000000, X, Y) && !ellipse(23183.432553, 23140.672966, 1283.192037, 792.864255, 37.254477, X, Y) && !ellipse(23580.436200, 25786.565600, 877.032025, 877.032025, 0.000000, X, Y) && !ellipse(25866.169600, 22328.710040, 1417.072041, 1417.072041, 0.000000, X, Y) && !ellipse(26888.574000, 23559.608000, 650.567219, 650.567219, 0.000000, X, Y) && !ellipse(24672.607880, 22305.102325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.552673, 23614.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29303.109070, 14303.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27111.759360, 24170.499800, 1167.032034, 1167.032034, 0.000000, X, Y) && !ellipse(25390.841095, 24065.153107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26098.270000, 26161.346000, 1235.864036, 1235.864036, 0.000000, X, Y) && !ellipse(24527.093689, 26138.003510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.932000, 24503.236934, 1103.136032, 839.334551, 121.202119, X, Y) && !ellipse(26649.232000, 25140.430000, 1066.392031, 1066.392031, 0.000000, X, Y) && !ellipse(22710.688000, 24522.966000, 1215.400035, 1215.400035, 0.000000, X, Y) && !ellipse(25734.608000, 24707.498000, 1119.008032, 1119.008032, 0.000000, X, Y) && !ellipse(23786.385651, 24740.207581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.041200, 23934.692000, 1551.832045, 1551.832045, 0.000000, X, Y) && !ellipse(17129.752000, 19448.454200, 393.533611, 393.533611, 0.000000, X, Y) && !ellipse(21290.614304, 20819.434219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.920000, 22548.600000, 1261.568036, 1261.568036, 0.000000, X, Y) && !ellipse(31752.809021, 14452.154907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21640.196000, 25343.688000, 1704.576049, 1704.576049, 0.000000, X, Y) && !ellipse(35369.933319, 11940.880844, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 30 20:21:19 2012] Writing fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src12.gif
[Sat Jun 30 20:45:26 2012] Mean detx,y = (747.25, -511.92) 
[Sat Jun 30 20:45:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 30 20:51:11 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 30 20:51:11 2012] Setting source spectrum file to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 30 20:51:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 30 23:10:38 2012] Updating aperture counts using extracted products
[Sat Jun 30 23:10:38 2012] Error reading totcts from fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 30 23:10:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 23:10:39 2012] Using photon index=1.80, rate=0.098, arf fullrun_mos2_xmm0113050401_pi300-10000_pass1_cl_src12.arf
[Sat Jun 30 23:10:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 30 23:10:39 2012] Updating source flux to 8.3e-13
[Sat Jun 30 23:12:55 2012] Flag c found in src. 12 procflags, skipping spectral fitting