[Mon Jul 30 10:13:38 2012] Detection parameters:
  Position = (275.2, 169.9) = 10 58 7.41 -52 34 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 11.0
  Background counts = 5.9
  Rate = 0.005 +/- 0.0008

[Mon Jul 30 10:13:39 2012] Off-axis axis estimate = 9.47'
[Mon Jul 30 10:15:10 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 10:15:10 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Mon Jul 30 10:15:10 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Mon Jul 30 10:15:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.16"
[Mon Jul 30 10:52:03 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul 30 10:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_src7.csv
[Mon Jul 30 10:52:03 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul 30 10:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_src7.csv
[Mon Jul 30 10:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 10:52:03 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul 30 10:52:03 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul 30 10:52:03 2012] Fit fullrun_mos1_xmm0113050101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jul 30 11:44:15 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.648718 pixels away
[Mon Jul 30 11:44:15 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 11:44:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 11:44:15 2012] Assessing source extent using major
[Mon Jul 30 11:44:15 2012] Source does appear to be extended
[Mon Jul 30 11:44:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 11:44:28 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 11:44:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 30 11:44:28 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Mon Jul 30 11:44:28 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Mon Jul 30 11:44:28 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.16"
[Mon Jul 30 12:13:52 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul 30 12:13:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_src7.csv
[Mon Jul 30 12:13:52 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul 30 12:13:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_src7.csv
[Mon Jul 30 12:13:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 12:13:52 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul 30 12:13:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jul 30 12:13:52 2012] fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul 30 12:13:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jul 30 12:13:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113050101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 12:49:16 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 26.795175 pixels away
[Mon Jul 30 12:49:16 2012] Spatial fit model total counts = 229.453000, observed total counts = 198.000000
[Mon Jul 30 12:49:16 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 12:49:16 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 12:49:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 12:49:16 2012] Assessing source extent using major
[Mon Jul 30 12:49:16 2012] Source does appear to be extended
[Mon Jul 30 12:49:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:49:31 2012] XMMSAS src. selection expression = ellipse(23892.878876, 14736.532440, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 12:49:31 2012] Writing source region out to fullrun_mos1_xmm0113050101_pi300-10000_pass1_cl_src7_src.reg
[Mon Jul 30 12:49:31 2012] Extracting stamp from image fullrun_mos1_xmm0113050101_pi300-10000_cl_sm2.00.img.gz, (238, 132) - (313, 207)
[Mon Jul 30 12:49:31 2012] XMMSAS bgd. selection expression = annulus(23892.878876, 14736.532440, 1087.500000, 2175.000000, X, Y) && !ellipse(24040.531963, 12402.616509, 564.296753, 299.743474, 0.000000, X, Y)
[Mon Jul 30 12:49:31 2012] Writing fullrun_mos1_xmm0113050101_pi300-10000_pass1_cl_src7.gif
[Mon Jul 30 12:51:30 2012] Mean detx,y = (8129.98, 4825.28) 
[Mon Jul 30 12:51:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:52:12 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:52:12 2012] Setting source spectrum file to fullrun_mos1_xmm0113050101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 30 12:52:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0113050101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jul 30 13:02:09 2012] Not generating rmf since there are only 67 counts
[Mon Jul 30 13:02:09 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:30:41 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:30:41 2012] Error reading totcts from fullrun_mos1_xmm0113050101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 30 13:30:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:30:42 2012] Using photon index=1.80, rate=0.00502, arf fullrun_mos1_xmm0113050101_pi300-10000_pass1_cl_src7.arf
[Mon Jul 30 13:30:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:30:42 2012] Updating source flux to 7.8e-14
[Mon Jul 30 13:30:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting