[Mon Jun  4 09:42:57 2012] Detection parameters:
  Position = (472.8, 244.3) = 8 42 11.72 -13 58 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.5 +/- 18.0
  Background counts = 6.1
  Rate = 0.008 +/- 0.0008

[Mon Jun  4 09:42:58 2012] Off-axis axis estimate = 13.23'
[Mon Jun  4 11:50:22 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:50:22 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Mon Jun  4 11:50:22 2012] source mask rpix=3.0, npix_max = 48, mask sum = 37, frac = 0.756
[Mon Jun  4 11:50:22 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.04"
[Mon Jun  4 12:39:14 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  4 12:39:14 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  4 12:39:14 2012] Fit fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Jun  4 12:39:14 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  4 12:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  4 12:39:14 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  4 12:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  4 12:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113041401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 12:39:40 2012] Spatial fit model total counts = 205.848000, observed total counts = 196.000000
[Mon Jun  4 12:39:40 2012] Offset between fit and detection position for source 3 = 0.507510 pixels
[Mon Jun  4 12:39:40 2012] 205.849000 total counts/ 102.575000 bgd. counts: snr = 10.196949
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.507510 pixels
  Position = (473.2, 244.1) = 8 42 11.58 -13 58 16.4
  Extent = 5.8" x 4.0", rotation angle = 1
  Source counts = 103.3 +/- 14.3
  Background counts = 102.6
  Rate = 0.005 +/- 0.0007
[Mon Jun  4 12:39:40 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 12:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 12:39:40 2012] Assessing source extent using major
[Mon Jun  4 12:39:40 2012] Source does appear to be extended
[Mon Jun  4 12:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.44
[Mon Jun  4 15:02:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 15:02:08 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Mon Jun  4 15:02:08 2012] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.664
[Mon Jun  4 15:02:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.89"
[Mon Jun  4 15:49:18 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun  4 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_src3.csv
[Mon Jun  4 15:49:18 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun  4 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_src3.csv
[Mon Jun  4 15:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 15:49:19 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun  4 15:49:19 2012] fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun  4 15:49:19 2012] Fit fullrun_mos2_xmm0113041401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun  4 15:49:44 2012] Spatial fit model total counts = 181.330000, observed total counts = 172.000000
[Mon Jun  4 15:49:44 2012] Offset between fit and detection position for source 3 = 0.148570 pixels
[Mon Jun  4 15:49:44 2012] 179.583000 total counts/ 68.799000 bgd. counts: snr = 13.356294
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.148570 pixels
  Position = (473.2, 244.0) = 8 42 11.59 -13 58 17.1
  Extent = 5.4 (4.2-6.6)", rotation angle = 0
  Source counts = 110.8 +/- 13.4
  Background counts = 68.8
  Rate = 0.005 +/- 0.0006
[Mon Jun  4 15:49:44 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 15:49:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 15:49:44 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 15:49:44 2012] Source does appear to be extended
[Mon Jun  4 15:49:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 17:15:15 2012] XMMSAS src. selection expression = ellipse(41120.363700, 21178.063000, 325.585209, 325.585209, 0.000000, X, Y)
[Mon Jun  4 17:15:15 2012] Writing source region out to fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun  4 17:15:15 2012] Extracting stamp from image fullrun_mos2_xmm0113041401_pi300-10000_cl_sm2.00.img.gz, (454, 225) - (492, 263)
[Mon Jun  4 17:15:15 2012] XMMSAS bgd. selection expression = annulus(41120.363700, 21178.063000, 542.642016, 1085.284031, X, Y)
[Mon Jun  4 17:15:15 2012] Writing fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3.gif
[Mon Jun  4 17:16:50 2012] Mean detx,y = (-804.44, -6314.27) 
[Mon Jun  4 17:16:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 17:17:14 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 17:17:14 2012] Setting source spectrum file to fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun  4 17:17:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun  4 17:35:07 2012] Updating aperture counts using extracted products
[Mon Jun  4 17:35:08 2012] Error reading totcts from fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun  4 17:35:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 17:35:09 2012] Using photon index=1.80, rate=0.0051, arf fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3.arf
[Mon Jun  4 17:35:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 17:35:09 2012] Updating source flux to 2e-13
[Mon Jun  4 17:35:41 2012] Reading fit data from xmm0113041401/analysis//spectral/fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3_pl.csv
[Mon Jun  4 17:35:41 2012] Spectral fit parameter nH value = 1.3879e+21
[Mon Jun  4 17:35:41 2012] Spectral fit parameter PhoIndex value = 1.47053
[Mon Jun  4 17:35:41 2012] Failed to get F(0.3-8.0) from xmm0113041401/analysis//spectral/fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jun  4 17:35:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 17:35:41 2012] Using Nh = 1.4e+21, photon index=1.47, rate=0.0051, arf fullrun_mos2_xmm0113041401_pi300-10000_pass1_cl_src3.arf
[Mon Jun  4 17:35:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 17:35:41 2012] Updating source flux to 2.7e-13