[Wed Sep  5 10:35:00 2012] Detection parameters:
  Position = (289.0, 259.1) = 1 20 35.87 -10 58 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.5 +/- 15.3
  Background counts = 18.3
  Rate = 0.02 +/- 0.002

[Wed Sep  5 10:35:00 2012] Off-axis axis estimate = 2.93'
[Wed Sep  5 10:58:30 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 10:58:30 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Wed Sep  5 10:58:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Wed Sep  5 10:58:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.90"
[Wed Sep  5 11:15:16 2012] fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Sep  5 11:15:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_src3.csv
[Wed Sep  5 11:15:16 2012] fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Sep  5 11:15:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_src3.csv
[Wed Sep  5 11:15:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 11:15:16 2012] fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep  5 11:15:16 2012] fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep  5 11:15:16 2012] Fit fullrun_mos2_xmm0113040801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep  5 11:15:22 2012] Spatial fit model total counts = 177.119000, observed total counts = 178.000000
[Wed Sep  5 11:15:22 2012] Offset between fit and detection position for source 6 = 0.038112 pixels
[Wed Sep  5 11:15:22 2012] 177.905700 total counts/ 110.717000 bgd. counts: snr = 6.385414
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.038112 pixels
  Position = (289.0, 259.0) = 1 20 35.87 -10 58 57.8
  Extent = 4.0 (3.1-5.2)", rotation angle = 0
  Source counts = 67.2 +/- 13.3
  Background counts = 110.7
  Rate = 0.008 +/- 0.002
[Wed Sep  5 11:15:22 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 11:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 11:15:22 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 11:15:22 2012] Source does appear to be extended
[Wed Sep  5 11:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 11:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 11:37:34 2012] Initial guess for spatial extent in simple fitting = 4.03"
[Wed Sep  5 11:37:34 2012] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.492
[Wed Sep  5 11:37:34 2012] Skipping simple spatial due to low active detector fraction
[Wed Sep  5 11:48:27 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 11:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 11:48:27 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 11:48:27 2012] Source does appear to be extended
[Wed Sep  5 11:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 11:54:08 2012] XMMSAS src. selection expression = ellipse(25095.781162, 22488.485600, 241.728607, 241.728607, 0.000000, X, Y)
[Wed Sep  5 11:54:08 2012] Writing source region out to fullrun_mos2_xmm0113040801_pi300-10000_pass1_cl_src6_src.reg
[Wed Sep  5 11:54:08 2012] Extracting stamp from image fullrun_mos2_xmm0113040801_pi300-10000_cl_sm2.00.img.gz, (275, 245) - (303, 273)
[Wed Sep  5 11:54:08 2012] XMMSAS bgd. selection expression = annulus(25095.781162, 22488.485600, 402.881012, 805.762023, X, Y)
[Wed Sep  5 11:54:08 2012] Writing fullrun_mos2_xmm0113040801_pi300-10000_pass1_cl_src6.gif
[Wed Sep  5 11:54:29 2012] Mean detx,y = (2818.64, 1504.97) 
[Wed Sep  5 11:54:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 11:54:36 2012] grppha failed
[Wed Sep  5 11:54:36 2012] Setting source spectrum file to fullrun_mos2_xmm0113040801_pi300-10000_pass1_cl_src6_src.pi.gz
[Wed Sep  5 11:54:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0113040801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Sep  5 11:56:02 2012] Not generating rmf since there are only 67 counts
[Wed Sep  5 11:56:02 2012] rmf not generated due to insufficient counts
[Wed Sep  5 11:56:16 2012] Updating aperture counts using extracted products
[Wed Sep  5 11:56:16 2012] Error reading totcts from fullrun_mos2_xmm0113040801_pi300-10000_pass1_cl_src6_src.pi.gz
[Wed Sep  5 11:56:16 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 11:56:18 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep  5 11:56:19 2012] xmm0113040801/analysis//spectral/fullrun_mos2_xmm0113040801_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete