[Thu Aug 23 10:22:48 2012] Detection parameters:
  Position = (227.3, 392.0) = 5 9 37.80 -68 37 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.9 +/- 11.1
  Background counts = 31.0
  Rate = 0.007 +/- 0.001

[Thu Aug 23 10:22:49 2012] Off-axis axis estimate = 8.52'
[Thu Aug 23 10:28:47 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 10:28:47 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Thu Aug 23 10:28:47 2012] source mask rpix=2.5, npix_max = 34, mask sum = 34, frac = 0.972
[Thu Aug 23 10:28:47 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.69"
[Thu Aug 23 12:17:47 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src25.ximg exists
[Thu Aug 23 12:17:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src25.csv
[Thu Aug 23 12:17:47 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Aug 23 12:17:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src25.csv
[Thu Aug 23 12:17:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 12:17:48 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Aug 23 12:17:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Aug 23 12:17:48 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Aug 23 12:17:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Aug 23 12:17:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 13:29:55 2012] Spatial fit model total counts = 158.957000, observed total counts = 125.000000
[Thu Aug 23 13:29:55 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 13:29:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 13:29:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 13:29:55 2012] Assessing source extent using major
[Thu Aug 23 13:29:55 2012] Source does appear to be extended
[Thu Aug 23 13:29:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 13:29:55 2012] Deleting source due to low Poisson probability 0.9