[Thu Aug 23 10:22:48 2012] Detection parameters:
  Position = (276.5, 290.2) = 5 8 58.71 -68 44 20.7
  Extent = 43.5" x 43.5", rotation angle = 0 degrees
  Source counts = 387.4 +/- 36.8
  Background counts = 668.8
  Rate = 0.04 +/- 0.003

[Thu Aug 23 10:22:49 2012] Off-axis axis estimate = 1.70'
[Thu Aug 23 10:28:47 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 10:28:47 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Aug 23 10:28:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Thu Aug 23 10:28:47 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.28"
[Thu Aug 23 12:17:47 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Aug 23 12:17:47 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Aug 23 12:17:47 2012] Fit fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_src23 appears to have run properly
[Thu Aug 23 12:17:48 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Aug 23 12:17:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu Aug 23 12:17:48 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Aug 23 12:17:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu Aug 23 12:17:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 13:29:55 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 15.429284 pixels away
[Thu Aug 23 13:29:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 13:29:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 13:29:55 2012] Assessing source extent using major
[Thu Aug 23 13:29:55 2012] Source does appear to be extended
[Thu Aug 23 13:29:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 13:29:55 2012] Source is confused with source 2
[Thu Aug 23 13:30:05 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 13:30:05 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Aug 23 13:30:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Thu Aug 23 13:30:05 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.28"
[Thu Aug 23 15:30:26 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_src21.ximg exists
[Thu Aug 23 15:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_src21.csv
[Thu Aug 23 15:30:26 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Aug 23 15:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_src21.csv
[Thu Aug 23 15:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 15:30:26 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Aug 23 15:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Aug 23 15:30:26 2012] fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Aug 23 15:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Aug 23 15:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 15:51:49 2012] Source 23 is offset by 0.571578 and -7.469889 pixels which is larger than
2 X fitted extent = 2.663954 x 2.663954, not incorporating fit results
[Thu Aug 23 15:51:49 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 15:51:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 15:51:49 2012] Assessing source extent using major
[Thu Aug 23 15:51:49 2012] Source does appear to be extended
[Thu Aug 23 15:51:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 15:51:58 2012] XMMSAS src. selection expression = ellipse(24009.724060, 25200.751617, 2610.000000, 2610.000000, 0.000000, X, Y)
[Thu Aug 23 15:51:58 2012] Writing source region out to fullrun_pn_xmm0113000301_pi300-10000_pass1_cl_src23_src.reg
[Thu Aug 23 15:51:58 2012] Extracting stamp from image fullrun_pn_xmm0113000301_pi300-10000_cl_sm2.00.img.gz, (127, 140) - (427, 440)
[Thu Aug 23 15:51:58 2012] XMMSAS bgd. selection expression = annulus(24009.724060, 25200.751617, 4350.000000, 8700.000000, X, Y) && !ellipse(23977.676300, 26301.302000, 2215.753082, 2215.753082, 0.000000, X, Y) && !ellipse(32640.366000, 30783.578000, 1625.304047, 1625.304047, 0.000000, X, Y) && !ellipse(31741.558000, 30289.162000, 2588.592074, 2588.592074, 0.000000, X, Y) && !ellipse(30712.368800, 29809.182702, 1867.088054, 689.945869, 334.161875, X, Y) && !ellipse(30049.034000, 29527.892000, 2317.528067, 2317.528067, 0.000000, X, Y) && !ellipse(29433.298000, 29119.602000, 1383.656040, 1383.656040, 0.000000, X, Y) && !ellipse(28856.296000, 28823.946000, 1335.648038, 1335.648038, 0.000000, X, Y) && !ellipse(28742.297385, 28747.557467, 2671.296077, 724.491689, 332.276079, X, Y) && !ellipse(27846.511795, 28326.253491, 1867.088054, 618.123355, 329.426764, X, Y) && !ellipse(26871.197815, 27863.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.404000, 27519.870000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(32962.075600, 21138.615000, 373.266411, 373.266411, 0.000000, X, Y) && !ellipse(28039.140760, 34175.893800, 412.874412, 412.874412, 0.000000, X, Y)
[Thu Aug 23 15:51:58 2012] Writing fullrun_pn_xmm0113000301_pi300-10000_pass1_cl_src23.gif
[Thu Aug 23 16:40:16 2012] Mean detx,y = (158.43, -60.97) 
[Thu Aug 23 16:40:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 16:42:40 2012] grppha failed
[Thu Aug 23 16:42:40 2012] Setting source spectrum file to fullrun_pn_xmm0113000301_pi300-10000_pass1_cl_src23_src.pi.gz
[Thu Aug 23 16:42:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0113000301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Aug 23 16:43:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 16:43:58 2012] rmf not generated due to insufficient counts
[Thu Aug 23 16:57:08 2012] Updating aperture counts using extracted products
[Thu Aug 23 16:57:08 2012] Error reading totcts from fullrun_pn_xmm0113000301_pi300-10000_pass1_cl_src23_src.pi.gz
[Thu Aug 23 16:57:08 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 16:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 16:57:13 2012] xmm0113000301/analysis//spectral/fullrun_pn_xmm0113000301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete