[Thu Aug 23 10:23:19 2012] Detection parameters:
  Position = (276.5, 303.0) = 5 8 58.73 -68 43 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30220.3 +/- 209.8
  Background counts = 7.7
  Rate = 4 +/- 0.03

[Thu Aug 23 10:23:20 2012] Off-axis axis estimate = 1.63'
[Thu Aug 23 12:17:48 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 12:17:48 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Aug 23 12:17:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Thu Aug 23 12:17:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Aug 23 12:34:40 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 23 12:34:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 12:34:40 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 23 12:34:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 12:34:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 12:34:40 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 23 12:34:40 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 23 12:34:40 2012] Fit fullrun_mos1_xmm0113000301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 23 13:29:57 2012] Spatial fit model total counts = 29758.000000, observed total counts = 29758.000000
[Thu Aug 23 13:29:57 2012] Offset between fit and detection position for source 2 = 0.383918 pixels
[Thu Aug 23 13:29:57 2012] 29713.460000 total counts/ 3644.860000 bgd. counts: snr = 431.794675
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.383918 pixels
  Position = (276.1, 302.9) = 5 8 59.04 -68 43 33.8
  Extent = 8.9 (8.8-9.0)", rotation angle = 0
  Source counts = 26068.6 +/- 172.4
  Background counts = 3644.9
  Rate = 3 +/- 0.02
[Thu Aug 23 13:29:57 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 13:29:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 13:29:57 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 13:29:57 2012] Source does appear to be extended
[Thu Aug 23 13:29:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 15:30:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 15:30:26 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Thu Aug 23 15:30:26 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959
[Thu Aug 23 15:30:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.93"
[Thu Aug 23 15:36:55 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 23 15:36:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_src1.csv
[Thu Aug 23 15:36:55 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 23 15:36:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_src1.csv
[Thu Aug 23 15:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 15:36:55 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 23 15:36:55 2012] fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 23 15:36:55 2012] Fit fullrun_mos1_xmm0113000301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 23 15:51:50 2012] Spatial fit model total counts = 30068.000000, observed total counts = 30068.000000
[Thu Aug 23 15:51:50 2012] Offset between fit and detection position for source 2 = 0.016041 pixels
[Thu Aug 23 15:51:50 2012] 30067.600000 total counts/ 3776.700000 bgd. counts: snr = 427.808303
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016041 pixels
  Position = (276.1, 302.9) = 5 8 59.05 -68 43 33.9
  Extent = 9.0 (8.9-9.1)", rotation angle = 0
  Source counts = 26290.9 +/- 173.4
  Background counts = 3776.7
  Rate = 3 +/- 0.02
[Thu Aug 23 15:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 15:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 15:51:50 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 15:51:50 2012] Source does appear to be extended
[Thu Aug 23 15:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 16:43:58 2012] Counts = 26290.900000, rescaling region sizes by 3.000000
[Thu Aug 23 16:43:58 2012] XMMSAS src. selection expression = ellipse(23971.768000, 26306.447600, 1620.336647, 1620.336647, 0.000000, X, Y)
[Thu Aug 23 16:43:58 2012] Writing source region out to fullrun_mos1_xmm0113000301_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug 23 16:43:58 2012] Extracting stamp from image fullrun_mos1_xmm0113000301_pi300-10000_cl_sm2.00.img.gz, (183, 210) - (369, 396)
[Thu Aug 23 16:43:58 2012] XMMSAS bgd. selection expression = annulus(23971.768000, 26306.447600, 8101.683233, 16203.366466, X, Y) && !ellipse(12125.431600, 24000.992000, 861.576025, 861.576025, 0.000000, X, Y) && !ellipse(32967.759600, 21140.860800, 606.096817, 606.096817, 0.000000, X, Y) && !ellipse(26808.822800, 13261.131200, 478.428814, 478.428814, 0.000000, X, Y)
[Thu Aug 23 16:43:58 2012] Writing fullrun_mos1_xmm0113000301_pi300-10000_pass1_cl_src2.gif
[Thu Aug 23 16:44:02 2012] Mean detx,y = (140.81, -127.53) 
[Thu Aug 23 16:44:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 16:49:57 2012] grppha failed
[Thu Aug 23 16:49:57 2012] Setting source spectrum file to fullrun_mos1_xmm0113000301_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 23 16:49:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0113000301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 23 16:57:08 2012] Updating aperture counts using extracted products
[Thu Aug 23 16:57:08 2012] Error reading totcts from fullrun_mos1_xmm0113000301_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 23 16:57:08 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 16:57:10 2012] Source 2 has no response, skipping
[Thu Aug 23 16:57:11 2012] xmm0113000301/analysis//spectral/fullrun_mos1_xmm0113000301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete