[Tue Jul 31 10:18:02 2012] Detection parameters:
  Position = (288.0, 284.1) = 16 36 10.60 66 10 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.0 +/- 12.3
  Background counts = 29.7
  Rate = 0.006 +/- 0.002

[Tue Jul 31 10:18:03 2012] Off-axis axis estimate = 1.28'
[Tue Jul 31 10:21:19 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:21:19 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Jul 31 10:21:19 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Tue Jul 31 10:21:19 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.07"
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src33.csv
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src33.csv
[Tue Jul 31 12:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 12:33:06 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jul 31 12:33:06 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jul 31 12:33:06 2012] Fit fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Jul 31 17:13:01 2012] Spatial fit model total counts = 1226.700000, observed total counts = 1230.000000
[Tue Jul 31 17:13:01 2012] Offset between fit and detection position for source 33 = 3.300031 pixels
[Tue Jul 31 17:13:01 2012] Warning, changing simple spatial fit ID from 33 to 28
[Tue Jul 31 17:13:01 2012] 1240.230100 total counts/ 1211.190000 bgd. counts: snr = 0.834434
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 3.300031 pixels
  Position = (289.9, 286.9) = 16 36 9.26 66 10 57.9
  Extent = 8.1 (2.4-13.3)", rotation angle = 0
  Source counts = 29.0 +/- 35.2
  Background counts = 1211.2
  Rate = 0.003 +/- 0.004
  Deleting source due to low Poisson probability