[Tue Jul 31 10:18:02 2012] Detection parameters:
  Position = (303.4, 290.1) = 16 35 59.52 66 11 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 20.0
  Background counts = 35.3
  Rate = 0.02 +/- 0.002

[Tue Jul 31 10:18:03 2012] Off-axis axis estimate = 0.70'
[Tue Jul 31 10:21:19 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:21:19 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Tue Jul 31 10:21:19 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Tue Jul 31 10:21:19 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 6.78"
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src30.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src30.csv
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src30.csv
[Tue Jul 31 12:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 12:33:06 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Jul 31 12:33:06 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Jul 31 12:33:06 2012] Fit fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Jul 31 17:13:01 2012] Source 30 is offset by -5.809490 and -7.049186 pixels which is larger than
2 X fitted extent = 6.234299 x 6.234299, not incorporating fit results
[Tue Jul 31 17:13:01 2012] Spatial fit model total counts = 842.359000, observed total counts = 845.000000
[Tue Jul 31 17:13:01 2012] Offset between fit and detection position for source 30 = 4.240762 pixels
[Tue Jul 31 17:13:01 2012] Warning, changing simple spatial fit ID from 30 to 32
[Tue Jul 31 17:13:01 2012] 859.579400 total counts/ 763.027000 bgd. counts: snr = 3.495370
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.240762 pixels
  Position = (307.6, 290.5) = 16 35 56.48 66 11 13.6
  Extent = 14.1 (14.0-28.1)", rotation angle = 0
  Source counts = 96.6 +/- 29.3
  Background counts = 763.0
  Rate = 0.01 +/- 0.003
[Tue Jul 31 17:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:01 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 17:13:01 2012] Source does appear to be extended
[Tue Jul 31 17:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:01 2012] Source is confused with source 35
[Tue Jul 31 17:13:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 31 17:13:38 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Tue Jul 31 17:13:38 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.879
[Tue Jul 31 17:13:38 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 14.07"
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src25.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src25.csv
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src25.csv
[Tue Jul 31 18:43:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Jul 31 18:43:43 2012] Fit fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Jul 31 22:23:37 2012] Warning, spatial fit 25 centroid is now closest to src. 6
[Tue Jul 31 22:23:37 2012] Source 30 is offset by 4.864138 and 2.047885 pixels which is larger than
2 X fitted extent = 1.647283 x 1.647283, not incorporating fit results
[Tue Jul 31 22:23:37 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:37 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 22:23:37 2012] Source does appear to be extended
[Tue Jul 31 22:23:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 22:23:56 2012] XMMSAS src. selection expression = ellipse(26716.982000, 25222.208000, 844.062024, 844.062024, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing source region out to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src30_src.reg
[Tue Jul 31 22:23:56 2012] Extracting stamp from image fullrun_pn_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (259, 242) - (356, 339)
[Tue Jul 31 22:23:56 2012] XMMSAS bgd. selection expression = annulus(26716.982000, 25222.208000, 1406.770040, 2813.540081, X, Y) && !ellipse(27458.479675, 28438.496124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28321.152000, 27348.848000, 1202.696035, 1202.696035, 0.000000, X, Y) && !ellipse(27535.407000, 27118.701400, 1161.680033, 1161.680033, 0.000000, X, Y) && !ellipse(28929.703094, 26655.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28519.487793, 25712.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.901398, 28784.273865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.715210, 28315.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.873108, 27954.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.845581, 27631.555725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29193.005005, 27420.680023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.309601, 27093.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.461823, 26992.094574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.751770, 26339.785736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29806.202606, 25880.224060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.752808, 25368.246796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24926.157867, 25190.258942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.368011, 24509.984680, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src30.gif
[Tue Jul 31 22:33:24 2012] Mean detx,y = (-61.04, 1480.90) 
[Tue Jul 31 22:33:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 22:33:43 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 22:33:43 2012] Setting source spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jul 31 22:33:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Jul 31 23:30:07 2012] Not generating rmf since there are only 96 counts
[Tue Jul 31 23:30:07 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:17 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:17 2012] Error reading totcts from fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Aug  1 02:33:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:18 2012] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src30.arf
[Wed Aug  1 02:33:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:18 2012] Updating source flux to 2.4e-14
[Wed Aug  1 02:35:00 2012] Flag b found in src. 30 procflags, skipping spectral fitting
[Wed Aug  1 02:35:00 2012] Flag c found in src. 30 procflags, skipping spectral fitting
[Wed Aug  1 02:35:00 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting