[Tue Jul 31 10:18:01 2012] Detection parameters:
  Position = (325.7, 321.6) = 16 35 43.50 66 13 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.5 +/- 23.6
  Background counts = 36.1
  Rate = 0.04 +/- 0.003

[Tue Jul 31 10:18:03 2012] Off-axis axis estimate = 2.59'
[Tue Jul 31 10:21:19 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:21:19 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Tue Jul 31 10:21:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.869
[Tue Jul 31 10:21:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.73"
[Tue Jul 31 12:33:04 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 31 12:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src3.csv
[Tue Jul 31 12:33:04 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 31 12:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src3.csv
[Tue Jul 31 12:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 31 12:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:13:01 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Tue Jul 31 17:13:01 2012] Source 3 is offset by 0.223249 and -5.873903 pixels which is larger than
2 X fitted extent = 7.548506 x 2.312753, not incorporating fit results
[Tue Jul 31 17:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:01 2012] Assessing source extent using major
[Tue Jul 31 17:13:01 2012] Source does appear to be extended
[Tue Jul 31 17:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:38 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 17:13:38 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Tue Jul 31 17:13:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.869
[Tue Jul 31 17:13:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.73"
[Tue Jul 31 18:43:42 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul 31 18:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src3.csv
[Tue Jul 31 18:43:42 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul 31 18:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src3.csv
[Tue Jul 31 18:43:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul 31 18:43:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:37 2012] Source 3 is offset by 0.151601 and -4.934342 pixels which is larger than
2 X fitted extent = 0.888005 x 0.888005, not incorporating fit results
[Tue Jul 31 22:23:37 2012] Spatial fit model total counts = 1866.380000, observed total counts = 1734.000000
[Tue Jul 31 22:23:37 2012] Offset between fit and detection position for source 3 = 6.739762 pixels
[Tue Jul 31 22:23:37 2012] Warning, changing simple spatial fit ID from 3 to 5
[Tue Jul 31 22:23:37 2012] 1866.649000 total counts/ 1694.190000 bgd. counts: snr = 4.189911
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.739762 pixels
  Position = (326.1, 314.9) = 16 35 43.22 66 12 59.9
  Extent = 15.0" x 15.0", rotation angle = 0
  Source counts = 172.5 +/- 43.2
  Background counts = 1694.2
  Rate = 0.02 +/- 0.005
[Tue Jul 31 22:23:37 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:37 2012] Assessing source extent using major
[Tue Jul 31 22:23:37 2012] Source does appear to be extended
[Tue Jul 31 22:23:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 22:23:37 2012] Source is confused with source 4
[Tue Jul 31 22:23:37 2012] Source is confused with source 20
[Tue Jul 31 22:23:56 2012] XMMSAS src. selection expression = ellipse(28321.152000, 27348.848000, 902.022026, 902.022026, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing source region out to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3_src.reg
[Tue Jul 31 22:23:56 2012] Extracting stamp from image fullrun_pn_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (274, 263) - (378, 367)
[Tue Jul 31 22:23:56 2012] XMMSAS bgd. selection expression = annulus(28321.152000, 27348.848000, 1503.370043, 3006.740087, X, Y) && !ellipse(27458.479675, 28438.496124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.407000, 27118.701400, 1161.680033, 1161.680033, 0.000000, X, Y) && !ellipse(28929.703094, 26655.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28519.487793, 25712.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.901398, 28784.273865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.715210, 28315.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.873108, 27954.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.845581, 27631.555725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29193.005005, 27420.680023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.309601, 27093.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29806.202606, 25880.224060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.752808, 25368.246796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24926.157867, 25190.258942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.982000, 25222.208000, 1125.416032, 1125.416032, 0.000000, X, Y) && !ellipse(25788.368011, 24509.984680, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3.gif
[Tue Jul 31 22:24:51 2012] Mean detx,y = (179.78, -715.66) 
[Tue Jul 31 22:24:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 22:25:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 22:25:22 2012] Setting source spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 31 22:25:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug  1 02:33:17 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:17 2012] Error reading totcts from fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  1 02:33:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:18 2012] Using photon index=1.80, rate=0.0181, arf fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3.arf
[Wed Aug  1 02:33:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:18 2012] Updating source flux to 6.3e-14
[Wed Aug  1 02:35:00 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed Aug  1 02:35:00 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Aug  1 02:35:16 2012] Reading fit data from xmm0112980501/analysis//spectral/fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3_pl.csv
[Wed Aug  1 02:35:16 2012] Spectral fit parameter nH value = 7.17872e+20
[Wed Aug  1 02:35:16 2012] Spectral fit parameter PhoIndex value = 1.84866
[Wed Aug  1 02:35:16 2012] Failed to get F(0.3-8.0) from xmm0112980501/analysis//spectral/fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 02:35:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:35:16 2012] Using Nh = 7.2e+20, photon index=1.85, rate=0.0181, arf fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src3.arf
[Wed Aug  1 02:35:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:35:16 2012] Updating source flux to 7.3e-14