[Tue Jul 31 10:18:02 2012] Detection parameters:
  Position = (295.9, 292.1) = 16 36 4.89 66 11 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.0 +/- 17.2
  Background counts = 34.1
  Rate = 0.01 +/- 0.002

[Tue Jul 31 10:18:03 2012] Off-axis axis estimate = 0.49'
[Tue Jul 31 10:21:19 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:21:19 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Tue Jul 31 10:21:19 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967
[Tue Jul 31 10:21:19 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 6.67"
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src28.csv
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src28.csv
[Tue Jul 31 12:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 12:33:06 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jul 31 12:33:06 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jul 31 12:33:06 2012] Fit fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Jul 31 17:13:01 2012] Warning, spatial fit 28 centroid is now closest to src. 33
[Tue Jul 31 17:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:01 2012] Assessing source extent using major
[Tue Jul 31 17:13:01 2012] Source does appear to be extended
[Tue Jul 31 17:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:38 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 17:13:38 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Tue Jul 31 17:13:38 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967
[Tue Jul 31 17:13:38 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 6.67"
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src23.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src23.csv
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src23.csv
[Tue Jul 31 18:43:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Jul 31 18:43:43 2012] Fit fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Jul 31 22:23:37 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.750917 pixels away
[Tue Jul 31 22:23:37 2012] Source 28 is offset by -6.191416 and -6.990336 pixels which is larger than
2 X fitted extent = 6.136874 x 6.136874, not incorporating fit results
[Tue Jul 31 22:23:37 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:37 2012] Assessing source extent using major
[Tue Jul 31 22:23:37 2012] Source does appear to be extended
[Tue Jul 31 22:23:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 22:23:56 2012] XMMSAS src. selection expression = ellipse(25698.752808, 25368.246796, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing source region out to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src28_src.reg
[Tue Jul 31 22:23:56 2012] Extracting stamp from image fullrun_pn_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (258, 255) - (333, 330)
[Tue Jul 31 22:23:56 2012] XMMSAS bgd. selection expression = annulus(25698.752808, 25368.246796, 1087.500000, 2175.000000, X, Y) && !ellipse(28321.152000, 27348.848000, 1202.696035, 1202.696035, 0.000000, X, Y) && !ellipse(27535.407000, 27118.701400, 1161.680033, 1161.680033, 0.000000, X, Y) && !ellipse(28519.487793, 25712.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.715210, 28315.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.845581, 27631.555725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.309601, 27093.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.461823, 26992.094574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.751770, 26339.785736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24926.157867, 25190.258942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.982000, 25222.208000, 1125.416032, 1125.416032, 0.000000, X, Y) && !ellipse(25788.368011, 24509.984680, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src28.gif
[Tue Jul 31 22:32:36 2012] Mean detx,y = (-974.52, 1966.32) 
[Tue Jul 31 22:32:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 22:32:56 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 22:32:56 2012] Setting source spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jul 31 22:32:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jul 31 23:29:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 23:29:47 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:17 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:17 2012] Error reading totcts from fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Aug  1 02:33:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:18 2012] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src28.arf
[Wed Aug  1 02:33:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:18 2012] Updating source flux to 4.3e-14
[Wed Aug  1 02:35:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting