[Tue Jul 31 10:18:01 2012] Detection parameters:
  Position = (316.2, 327.4) = 16 35 50.34 66 13 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.3 +/- 18.5
  Background counts = 35.3
  Rate = 0.02 +/- 0.002

[Tue Jul 31 10:18:03 2012] Off-axis axis estimate = 2.46'
[Tue Jul 31 10:21:19 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:21:19 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Tue Jul 31 10:21:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.782
[Tue Jul 31 10:21:19 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.66"
[Tue Jul 31 12:33:04 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 31 12:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src2.csv
[Tue Jul 31 12:33:04 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 31 12:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src2.csv
[Tue Jul 31 12:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul 31 12:33:05 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 31 12:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul 31 12:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:13:01 2012] Warning, spatial fit 2 centroid is now closest to src. 14
[Tue Jul 31 17:13:01 2012] Spatial fit model total counts = 1270.710000, observed total counts = 753.000000
[Tue Jul 31 17:13:01 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 31 17:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:01 2012] Assessing source extent using major
[Tue Jul 31 17:13:01 2012] Source does appear to be extended
[Tue Jul 31 17:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:38 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 17:13:38 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Tue Jul 31 17:13:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.782
[Tue Jul 31 17:13:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.66"
[Tue Jul 31 18:43:42 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul 31 18:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src2.csv
[Tue Jul 31 18:43:42 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul 31 18:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src2.csv
[Tue Jul 31 18:43:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul 31 18:43:43 2012] fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul 31 18:43:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul 31 18:43:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:37 2012] Source 2 is offset by 2.282047 and 6.481174 pixels which is larger than
2 X fitted extent = 5.693242 x 5.693242, not incorporating fit results
[Tue Jul 31 22:23:37 2012] Spatial fit model total counts = 1219.910000, observed total counts = 753.000000
[Tue Jul 31 22:23:37 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 31 22:23:37 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:37 2012] Assessing source extent using major
[Tue Jul 31 22:23:37 2012] Source does appear to be extended
[Tue Jul 31 22:23:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 22:23:56 2012] XMMSAS src. selection expression = ellipse(27458.479675, 28438.496124, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing source region out to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul 31 22:23:56 2012] Extracting stamp from image fullrun_pn_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (279, 290) - (354, 365)
[Tue Jul 31 22:23:56 2012] XMMSAS bgd. selection expression = annulus(27458.479675, 28438.496124, 1087.500000, 2175.000000, X, Y) && !ellipse(28321.152000, 27348.848000, 1202.696035, 1202.696035, 0.000000, X, Y) && !ellipse(27535.407000, 27118.701400, 1161.680033, 1161.680033, 0.000000, X, Y) && !ellipse(28929.703094, 26655.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28519.487793, 25712.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.901398, 28784.273865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.715210, 28315.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.873108, 27954.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.845581, 27631.555725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29193.005005, 27420.680023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.309601, 27093.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29806.202606, 25880.224060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.982000, 25222.208000, 1125.416032, 1125.416032, 0.000000, X, Y)
[Tue Jul 31 22:23:56 2012] Writing fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2.gif
[Tue Jul 31 22:24:25 2012] Mean detx,y = (-938.45, -1478.89) 
[Tue Jul 31 22:24:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 22:24:45 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 22:24:46 2012] Setting source spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 31 22:24:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul 31 22:35:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 22:35:00 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:17 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:17 2012] Error reading totcts from fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug  1 02:33:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:18 2012] Using photon index=1.80, rate=0.0229, arf fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2.arf
[Wed Aug  1 02:33:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:18 2012] Updating source flux to 7.3e-14
[Wed Aug  1 02:35:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug  1 02:35:16 2012] xmm0112980501/analysis//spectral/fullrun_pn_xmm0112980501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete