[Tue Jul 31 10:19:38 2012] Detection parameters:
  Position = (332.4, 309.5) = 16 35 38.70 66 12 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.5 +/- 14.7
  Background counts = 22.6
  Rate = 0.008 +/- 0.001

[Tue Jul 31 10:19:39 2012] Off-axis axis estimate = 2.59'
[Tue Jul 31 14:51:35 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 14:51:35 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jul 31 14:51:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.111
[Tue Jul 31 14:51:35 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.72"
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src13.csv
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src13.csv
[Tue Jul 31 17:12:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jul 31 17:12:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:13:21 2012] Warning, spatial fit 13 centroid is now closest to src. 6
[Tue Jul 31 17:13:21 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:21 2012] Assessing source extent using major
[Tue Jul 31 17:13:21 2012] Source does appear to be extended
[Tue Jul 31 17:13:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:22 2012] Source is confused with source 29
[Tue Jul 31 17:13:22 2012] Source is confused with source 26
[Tue Jul 31 20:51:06 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 20:51:06 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jul 31 20:51:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.111
[Tue Jul 31 20:51:06 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.72"
[Tue Jul 31 22:23:29 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jul 31 22:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src13.csv
[Tue Jul 31 22:23:29 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jul 31 22:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src13.csv
[Tue Jul 31 22:23:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:30 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jul 31 22:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul 31 22:23:30 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jul 31 22:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul 31 22:23:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:47 2012] Source 5 is offset by 7.472433 and -2.698873 pixels which is larger than
2 X fitted extent = 0.887628 x 0.887628, not incorporating fit results
[Tue Jul 31 22:23:47 2012] Spatial fit model total counts = 583.835000, observed total counts = 568.000000
[Tue Jul 31 22:23:47 2012] Offset between fit and detection position for source 5 = 2.353458 pixels
[Tue Jul 31 22:23:47 2012] Warning, changing simple spatial fit ID from 13 to 19
[Tue Jul 31 22:23:47 2012] 548.483100 total counts/ 469.088000 bgd. counts: snr = 3.665781
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.353458 pixels
  Position = (330.8, 307.8) = 16 35 39.87 66 12 28.8
  Extent = 15.8 (15.7-15.8)", rotation angle = 0
  Source counts = 79.4 +/- 23.4
  Background counts = 469.1
  Rate = 0.006 +/- 0.002
[Tue Jul 31 22:23:47 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:47 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 22:23:47 2012] Source does appear to be extended
[Tue Jul 31 22:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 02:06:01 2012] XMMSAS src. selection expression = ellipse(28727.300000, 26728.621200, 945.300027, 945.300027, 0.000000, X, Y)
[Wed Aug  1 02:06:01 2012] Writing source region out to fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src5_src.reg
[Wed Aug  1 02:06:01 2012] Extracting stamp from image fullrun_mos2_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (276, 253) - (385, 362)
[Wed Aug  1 02:06:02 2012] XMMSAS bgd. selection expression = annulus(28727.300000, 26728.621200, 1575.500045, 3151.000091, X, Y) && !ellipse(27747.641800, 27158.518600, 1163.464033, 1163.464033, 0.000000, X, Y) && !ellipse(27436.256840, 26425.484200, 1249.912036, 1249.912036, 0.000000, X, Y) && !ellipse(27278.423800, 27240.177800, 1143.512033, 1143.512033, 0.000000, X, Y) && !ellipse(26775.437800, 26341.799400, 1101.864032, 1101.864032, 0.000000, X, Y) && !ellipse(25666.158000, 26324.774000, 917.096026, 917.096026, 0.000000, X, Y) && !ellipse(28508.174713, 26299.243439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.657349, 28026.499298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.363129, 28211.164551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.428070, 25448.566742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.120000, 24814.306000, 1082.384031, 1082.384031, 0.000000, X, Y) && !ellipse(26271.780000, 28642.744000, 1180.488034, 1180.488034, 0.000000, X, Y) && !ellipse(29155.311554, 27484.344971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29346.842712, 26479.705780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25213.809052, 25707.973724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25405.158000, 27455.774000, 917.096026, 917.096026, 0.000000, X, Y)
[Wed Aug  1 02:06:02 2012] Writing fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src5.gif
[Wed Aug  1 02:08:52 2012] Mean detx,y = (-632.20, 406.10) 
[Wed Aug  1 02:08:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 02:09:04 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 02:09:04 2012] Setting source spectrum file to fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Aug  1 02:09:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Aug  1 02:31:29 2012] Not generating rmf since there are only 79 counts
[Wed Aug  1 02:31:29 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:20 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:20 2012] Error reading totcts from fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Aug  1 02:33:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:21 2012] Using photon index=1.80, rate=0.0063, arf fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src5.arf
[Wed Aug  1 02:33:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:21 2012] Updating source flux to 6e-14
[Wed Aug  1 02:34:21 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Wed Aug  1 02:34:21 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed Aug  1 02:34:21 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting