[Tue Jul 31 10:19:39 2012] Detection parameters:
  Position = (269.8, 109.7) = 16 36 23.48 65 58 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.4 +/- 7.3
  Background counts = 6.5
  Rate = 0.002 +/- 0.0005

[Tue Jul 31 10:19:39 2012] Off-axis axis estimate = 13.84'
[Tue Jul 31 14:51:35 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 14:51:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 14:51:35 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Tue Jul 31 14:51:35 2012] source mask rpix=3.1, npix_max = 50, mask sum = 44, frac = 0.864
[Tue Jul 31 14:51:35 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 13.35"
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src32.csv
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src32.csv
[Tue Jul 31 17:12:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:12:47 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jul 31 17:12:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 31 17:12:47 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jul 31 17:12:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 31 17:12:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:13:21 2012] Spatial fit model total counts = 81.244400, observed total counts = 60.000000
[Tue Jul 31 17:13:21 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 31 17:13:22 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:22 2012] Assessing source extent using major
[Tue Jul 31 17:13:22 2012] Source does appear to be extended
[Tue Jul 31 17:13:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:22 2012] Deleting source due to low Poisson probability 0.9