[Tue Jul 31 10:19:39 2012] Detection parameters:
  Position = (335.7, 316.5) = 16 35 36.32 66 13 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.6 +/- 11.5
  Background counts = 21.8
  Rate = 0.005 +/- 0.001

[Tue Jul 31 10:19:39 2012] Off-axis axis estimate = 3.00'
[Tue Jul 31 14:51:35 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 14:51:35 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Tue Jul 31 14:51:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.834
[Tue Jul 31 14:51:35 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.93"
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src19.csv
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src19.csv
[Tue Jul 31 17:12:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jul 31 17:12:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jul 31 17:12:46 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jul 31 17:12:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jul 31 17:12:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:13:21 2012] Source 23 is offset by 6.244409 and -1.067934 pixels which is larger than
2 X fitted extent = 0.911315 x 0.911315, not incorporating fit results
[Tue Jul 31 17:13:22 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:22 2012] Assessing source extent using major
[Tue Jul 31 17:13:22 2012] Source does appear to be extended
[Tue Jul 31 17:13:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 20:51:06 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 20:51:06 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Tue Jul 31 20:51:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.834
[Tue Jul 31 20:51:06 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.93"
[Tue Jul 31 22:23:29 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src18.ximg exists
[Tue Jul 31 22:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src18.csv
[Tue Jul 31 22:23:29 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Jul 31 22:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src18.csv
[Tue Jul 31 22:23:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:30 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Jul 31 22:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jul 31 22:23:30 2012] fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Jul 31 22:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jul 31 22:23:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:47 2012] Source 23 is offset by 6.278822 and -1.065819 pixels which is larger than
2 X fitted extent = 0.983936 x 0.983936, not incorporating fit results
[Tue Jul 31 22:23:47 2012] Source 23 is offset by 0.415443 and -1.386747 pixels which is larger than
2 X fitted extent = 0.917430 x 0.917430, not incorporating fit results
[Tue Jul 31 22:23:47 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:47 2012] Assessing source extent using major
[Tue Jul 31 22:23:47 2012] Source does appear to be extended
[Tue Jul 31 22:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 22:23:47 2012] Source is confused with source 5
[Wed Aug  1 02:06:02 2012] XMMSAS src. selection expression = ellipse(29155.311554, 27484.344971, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  1 02:06:02 2012] Writing source region out to fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src23_src.reg
[Wed Aug  1 02:06:02 2012] Extracting stamp from image fullrun_mos2_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (298, 279) - (373, 354)
[Wed Aug  1 02:06:02 2012] XMMSAS bgd. selection expression = annulus(29155.311554, 27484.344971, 1087.500000, 2175.000000, X, Y) && !ellipse(27747.641800, 27158.518600, 1163.464033, 1163.464033, 0.000000, X, Y) && !ellipse(27436.256840, 26425.484200, 1249.912036, 1249.912036, 0.000000, X, Y) && !ellipse(27278.423800, 27240.177800, 1143.512033, 1143.512033, 0.000000, X, Y) && !ellipse(26775.437800, 26341.799400, 1101.864032, 1101.864032, 0.000000, X, Y) && !ellipse(28508.174713, 26299.243439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.657349, 28026.499298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.363129, 28211.164551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.428070, 25448.566742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28727.300000, 26728.621200, 1260.400036, 1260.400036, 0.000000, X, Y) && !ellipse(26271.780000, 28642.744000, 1180.488034, 1180.488034, 0.000000, X, Y) && !ellipse(29346.842712, 26479.705780, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 02:06:02 2012] Writing fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src23.gif
[Wed Aug  1 02:09:46 2012] Mean detx,y = (-791.45, 1252.28) 
[Wed Aug  1 02:09:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 02:09:56 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 02:09:56 2012] Setting source spectrum file to fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Aug  1 02:09:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Aug  1 02:32:30 2012] Not generating rmf since there are only 59 counts
[Wed Aug  1 02:32:30 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:20 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:20 2012] Error reading totcts from fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Aug  1 02:33:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:21 2012] Using photon index=1.80, rate=0.00522, arf fullrun_mos2_xmm0112980501_pi300-10000_pass1_cl_src23.arf
[Wed Aug  1 02:33:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:21 2012] Updating source flux to 5.3e-14
[Wed Aug  1 02:34:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting