[Tue Jul 31 10:18:39 2012] Detection parameters:
  Position = (259.3, 344.0) = 16 36 31.29 66 15 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.9 +/- 10.1
  Background counts = 12.8
  Rate = 0.006 +/- 0.001

[Tue Jul 31 10:18:41 2012] Off-axis axis estimate = 4.36'
[Tue Jul 31 12:33:06 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:33:06 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Tue Jul 31 12:33:06 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.773
[Tue Jul 31 12:33:06 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.61"
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src17.csv
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src17.csv
[Tue Jul 31 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:51:35 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jul 31 14:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Jul 31 14:51:35 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jul 31 14:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Jul 31 14:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 17:13:12 2012] Source 8 is offset by -6.197004 and 6.668798 pixels which is larger than
2 X fitted extent = 0.989628 x 0.989628, not incorporating fit results
[Tue Jul 31 17:13:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:12 2012] Assessing source extent using major
[Tue Jul 31 17:13:12 2012] Source does appear to be extended
[Tue Jul 31 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 18:43:44 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 18:43:45 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Tue Jul 31 18:43:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.773
[Tue Jul 31 18:43:45 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.61"
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src16.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src16.csv
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src16.csv
[Tue Jul 31 20:51:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Jul 31 20:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jul 31 20:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jul 31 20:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:42 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.115116 pixels away
[Tue Jul 31 22:23:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:42 2012] Assessing source extent using major
[Tue Jul 31 22:23:42 2012] Source does appear to be extended
[Tue Jul 31 22:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 23:30:30 2012] XMMSAS src. selection expression = ellipse(22508.838654, 29878.565430, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing source region out to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src8_src.reg
[Tue Jul 31 23:30:30 2012] Extracting stamp from image fullrun_mos1_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (222, 306) - (297, 381)
[Tue Jul 31 23:30:30 2012] XMMSAS bgd. selection expression = annulus(22508.838654, 29878.565430, 1087.500000, 2175.000000, X, Y) && !ellipse(25539.398000, 26874.590000, 1095.120032, 1095.120032, 0.000000, X, Y) && !ellipse(25564.302000, 28235.000000, 1148.392033, 1148.392033, 0.000000, X, Y) && !ellipse(25091.268000, 27711.468000, 1133.488033, 1133.488033, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src8.gif
[Tue Jul 31 23:44:25 2012] Mean detx,y = (286.35, -6215.27) 
[Tue Jul 31 23:44:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 23:44:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 23:44:51 2012] Setting source spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul 31 23:44:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Aug  1 01:48:58 2012] Not generating rmf since there are only 52 counts
[Wed Aug  1 01:48:58 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:19 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:19 2012] Error reading totcts from fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Aug  1 02:33:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:19 2012] Using photon index=1.80, rate=0.00569, arf fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src8.arf
[Wed Aug  1 02:33:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:19 2012] Updating source flux to 8.6e-14
[Wed Aug  1 02:33:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting