[Tue Jul 31 10:18:39 2012] Detection parameters:
  Position = (444.5, 432.9) = 16 34 17.47 66 21 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.7 +/- 9.3
  Background counts = 7.0
  Rate = 0.003 +/- 0.0007

[Tue Jul 31 10:18:41 2012] Off-axis axis estimate = 14.39'
[Tue Jul 31 12:33:06 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:33:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 12:33:06 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Tue Jul 31 12:33:06 2012] source mask rpix=3.1, npix_max = 52, mask sum = 54, frac = 1.023
[Tue Jul 31 12:33:06 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 13.63"
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src30.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src30.csv
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src30.csv
[Tue Jul 31 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:51:35 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Jul 31 14:51:35 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Jul 31 14:51:35 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Jul 31 17:13:12 2012] Spatial fit model total counts = 80.303500, observed total counts = 80.000000
[Tue Jul 31 17:13:12 2012] Offset between fit and detection position for source 5 = 0.039433 pixels
[Tue Jul 31 17:13:12 2012] 81.928300 total counts/ 51.074500 bgd. counts: snr = 4.317244
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.039433 pixels
  Position = (444.5, 433.0) = 16 34 17.46 66 21 31.2
  Extent = 6.0 (3.5-8.0)", rotation angle = 0
  Source counts = 30.9 +/- 9.1
  Background counts = 51.1
  Rate = 0.002 +/- 0.0007
[Tue Jul 31 17:13:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:12 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 17:13:12 2012] Source does appear to be extended
[Tue Jul 31 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:12 2012] Deleting source due to low Poisson probability 0.9