[Tue Jul 31 10:18:41 2012] Detection parameters:
  Position = (245.4, 257.1) = 16 36 41.11 66 8 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.6 +/- 9.6
  Background counts = 11.0
  Rate = 0.007 +/- 0.001

[Tue Jul 31 10:18:41 2012] Off-axis axis estimate = 4.87'
[Tue Jul 31 12:33:06 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:33:06 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Tue Jul 31 12:33:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.893
[Tue Jul 31 12:33:06 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.87"
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src11.csv
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src11.csv
[Tue Jul 31 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul 31 14:51:34 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jul 31 17:13:11 2012] Spatial fit model total counts = 122.842000, observed total counts = 111.000000
[Tue Jul 31 17:13:12 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 31 17:13:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:12 2012] Assessing source extent using major
[Tue Jul 31 17:13:12 2012] Source does appear to be extended
[Tue Jul 31 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 18:43:44 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 18:43:44 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Tue Jul 31 18:43:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.893
[Tue Jul 31 18:43:44 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.87"
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src10.csv
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src10.csv
[Tue Jul 31 20:51:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jul 31 20:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jul 31 20:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jul 31 20:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 22:23:42 2012] Spatial fit model total counts = 123.767000, observed total counts = 111.000000
[Tue Jul 31 22:23:42 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 31 22:23:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:42 2012] Assessing source extent using major
[Tue Jul 31 22:23:42 2012] Source does appear to be extended
[Tue Jul 31 22:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 23:30:30 2012] XMMSAS src. selection expression = ellipse(21303.768646, 22316.964996, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing source region out to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src32_src.reg
[Tue Jul 31 23:30:30 2012] Extracting stamp from image fullrun_mos1_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (208, 220) - (283, 295)
[Tue Jul 31 23:30:30 2012] XMMSAS bgd. selection expression = annulus(21303.768646, 22316.964996, 1087.500000, 2175.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src32.gif
[Tue Jul 31 23:42:56 2012] Mean detx,y = (-6827.93, -3610.95) 
[Tue Jul 31 23:42:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 23:43:13 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 23:43:13 2012] Setting source spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Jul 31 23:43:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Aug  1 01:47:51 2012] Not generating rmf since there are only 56 counts
[Wed Aug  1 01:47:51 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:19 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:19 2012] Error reading totcts from fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Aug  1 02:33:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:19 2012] Using photon index=1.80, rate=0.00675, arf fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src32.arf
[Wed Aug  1 02:33:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:19 2012] Updating source flux to 1.1e-13
[Wed Aug  1 02:33:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting