[Tue Jul 31 10:18:39 2012] Detection parameters:
  Position = (331.8, 309.0) = 16 35 39.11 66 12 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.6 +/- 16.6
  Background counts = 24.3
  Rate = 0.009 +/- 0.001

[Tue Jul 31 10:18:41 2012] Off-axis axis estimate = 2.54'
[Tue Jul 31 12:33:06 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:33:06 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Jul 31 12:33:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Tue Jul 31 12:33:06 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.70"
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src7.csv
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src7.csv
[Tue Jul 31 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul 31 14:51:34 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jul 31 17:13:11 2012] Source 19 is offset by 6.881633 and -1.524916 pixels which is larger than
2 X fitted extent = 4.749931 x 4.749931, not incorporating fit results
[Tue Jul 31 17:13:12 2012] Spatial fit model total counts = 460.218000, observed total counts = 457.000000
[Tue Jul 31 17:13:12 2012] Offset between fit and detection position for source 19 = 7.155683 pixels
[Tue Jul 31 17:13:12 2012] Warning, changing simple spatial fit ID from 7 to 13
[Tue Jul 31 17:13:12 2012] 434.434000 total counts/ 305.320000 bgd. counts: snr = 7.389171
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 7.155683 pixels
  Position = (332.5, 316.1) = 16 35 38.58 66 13 5.0
  Extent = 16.0 (15.7-16.2)", rotation angle = 0
  Source counts = 129.1 +/- 20.8
  Background counts = 305.3
  Rate = 0.01 +/- 0.002
[Tue Jul 31 17:13:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:12 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 17:13:12 2012] Source does appear to be extended
[Tue Jul 31 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:12 2012] Source is confused with source 33
[Tue Jul 31 17:13:12 2012] Source is confused with source 13
[Tue Jul 31 18:43:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 31 18:43:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 18:43:44 2012] Initial guess for spatial extent in simple fitting = 16.01"
[Tue Jul 31 18:43:44 2012] source mask rpix=3.7, npix_max = 69, mask sum = 71, frac = 1.016
[Tue Jul 31 18:43:44 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 16.01"
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jul 31 20:51:05 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jul 31 20:51:05 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Jul 31 22:23:42 2012] Warning, spatial fit 6 centroid is now closest to src. 33
[Tue Jul 31 22:23:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:42 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 22:23:42 2012] Source does appear to be extended
[Tue Jul 31 22:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 23:30:30 2012] XMMSAS src. selection expression = ellipse(28881.342000, 27451.318000, 960.318028, 960.318028, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing source region out to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src19_src.reg
[Tue Jul 31 23:30:30 2012] Extracting stamp from image fullrun_mos1_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (277, 261) - (388, 371)
[Tue Jul 31 23:30:30 2012] XMMSAS bgd. selection expression = annulus(28881.342000, 27451.318000, 1600.530046, 3201.060092, X, Y) && !ellipse(27448.596960, 26823.293800, 1147.376033, 1147.376033, 0.000000, X, Y) && !ellipse(27089.074000, 26724.058000, 2250.552065, 2250.552065, 0.000000, X, Y) && !ellipse(26722.283179, 26217.305468, 1170.352034, 1088.689381, 304.299420, X, Y) && !ellipse(26177.164000, 26314.344000, 1034.800030, 1034.800030, 0.000000, X, Y) && !ellipse(28716.663544, 26400.880615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25712.415588, 25713.047485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25539.398000, 26874.590000, 1095.120032, 1095.120032, 0.000000, X, Y) && !ellipse(29465.636688, 27668.720825, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28873.387268, 25803.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.265900, 25120.588318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.070000, 28027.692000, 1267.616036, 1267.616036, 0.000000, X, Y) && !ellipse(26334.656219, 25021.476074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.147461, 28258.732056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.302000, 28235.000000, 1148.392033, 1148.392033, 0.000000, X, Y) && !ellipse(25091.268000, 27711.468000, 1133.488033, 1133.488033, 0.000000, X, Y) && !ellipse(28149.730000, 28860.118000, 1083.504031, 1083.504031, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src19.gif
[Tue Jul 31 23:41:49 2012] Mean detx,y = (1209.43, 275.78) 
[Tue Jul 31 23:41:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 23:42:04 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 23:42:04 2012] Setting source spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Jul 31 23:42:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Aug  1 02:33:18 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:18 2012] Error reading totcts from fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug  1 02:33:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:19 2012] Using photon index=1.80, rate=0.0102, arf fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src19.arf
[Wed Aug  1 02:33:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:19 2012] Updating source flux to 9.4e-14
[Wed Aug  1 02:33:22 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Wed Aug  1 02:33:22 2012] Flag c found in src. 19 procflags, skipping spectral fitting