[Tue Jul 31 10:18:39 2012] Detection parameters:
  Position = (289.3, 314.9) = 16 36 9.65 66 13 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.7 +/- 13.6
  Background counts = 20.2
  Rate = 0.007 +/- 0.001

[Tue Jul 31 10:18:41 2012] Off-axis axis estimate = 1.37'
[Tue Jul 31 12:33:06 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:33:06 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Tue Jul 31 12:33:06 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878
[Tue Jul 31 12:33:06 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.11"
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src12.csv
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src12.csv
[Tue Jul 31 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jul 31 14:51:35 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jul 31 17:13:12 2012] Spatial fit model total counts = 566.728000, observed total counts = 562.000000
[Tue Jul 31 17:13:12 2012] Offset between fit and detection position for source 17 = 7.262329 pixels
[Tue Jul 31 17:13:12 2012] 566.924000 total counts/ 511.287000 bgd. counts: snr = 2.460545
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 7.262329 pixels
  Position = (294.1, 309.5) = 16 36 6.21 66 12 36.3
  Extent = 13.7 (12.3-14.2)", rotation angle = 0
  Source counts = 55.6 +/- 23.8
  Background counts = 511.3
  Rate = 0.004 +/- 0.002
[Tue Jul 31 17:13:12 2012] Source 17 is offset by 0.922023 and 1.212207 pixels which is larger than
2 X fitted extent = 1.081398 x 1.081398, not incorporating fit results
[Tue Jul 31 17:13:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:12 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 17:13:12 2012] Source does appear to be extended
[Tue Jul 31 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:12 2012] Source is confused with source 16
[Tue Jul 31 18:43:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 31 18:43:44 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Tue Jul 31 18:43:44 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.053
[Tue Jul 31 18:43:44 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.69"
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src11.csv
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src11.csv
[Tue Jul 31 20:51:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jul 31 20:51:06 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jul 31 22:23:42 2012] Warning, spatial fit 11 centroid is now closest to src. 16
[Tue Jul 31 22:23:42 2012] Source 17 is offset by 0.969471 and 1.212207 pixels which is larger than
2 X fitted extent = 1.145090 x 1.145090, not incorporating fit results
[Tue Jul 31 22:23:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:42 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 22:23:42 2012] Source does appear to be extended
[Tue Jul 31 22:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 23:30:30 2012] XMMSAS src. selection expression = ellipse(25539.398000, 26874.590000, 821.340024, 821.340024, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing source region out to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src17_src.reg
[Tue Jul 31 23:30:30 2012] Extracting stamp from image fullrun_mos1_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (247, 262) - (341, 357)
[Tue Jul 31 23:30:30 2012] XMMSAS bgd. selection expression = annulus(25539.398000, 26874.590000, 1368.900039, 2737.800079, X, Y) && !ellipse(27448.596960, 26823.293800, 1147.376033, 1147.376033, 0.000000, X, Y) && !ellipse(27089.074000, 26724.058000, 2250.552065, 2250.552065, 0.000000, X, Y) && !ellipse(26722.283179, 26217.305468, 1170.352034, 1088.689381, 304.299420, X, Y) && !ellipse(26177.164000, 26314.344000, 1034.800030, 1034.800030, 0.000000, X, Y) && !ellipse(28881.342000, 27451.318000, 1280.424037, 1280.424037, 0.000000, X, Y) && !ellipse(28716.663544, 26400.880615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25712.415588, 25713.047485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.636688, 27668.720825, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28873.387268, 25803.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.265900, 25120.588318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22508.838654, 29878.565430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.070000, 28027.692000, 1267.616036, 1267.616036, 0.000000, X, Y) && !ellipse(26334.656219, 25021.476074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.147461, 28258.732056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.302000, 28235.000000, 1148.392033, 1148.392033, 0.000000, X, Y) && !ellipse(25091.268000, 27711.468000, 1133.488033, 1133.488033, 0.000000, X, Y) && !ellipse(28149.730000, 28860.118000, 1083.504031, 1083.504031, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src17.gif
[Tue Jul 31 23:43:15 2012] Mean detx,y = (-712.80, -2036.86) 
[Tue Jul 31 23:43:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 23:43:28 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 23:43:29 2012] Setting source spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jul 31 23:43:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Aug  1 01:48:04 2012] Not generating rmf since there are only 55 counts
[Wed Aug  1 01:48:04 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:19 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:19 2012] Error reading totcts from fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Aug  1 02:33:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:19 2012] Using photon index=1.80, rate=0.00441, arf fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src17.arf
[Wed Aug  1 02:33:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:19 2012] Updating source flux to 4.3e-14
[Wed Aug  1 02:33:22 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Wed Aug  1 02:33:22 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Wed Aug  1 02:33:22 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting