[Tue Jul 31 10:18:39 2012] Detection parameters:
  Position = (331.9, 325.4) = 16 35 39.00 66 13 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 12.2
  Background counts = 22.5
  Rate = 0.005 +/- 0.001

[Tue Jul 31 10:18:41 2012] Off-axis axis estimate = 3.12'
[Tue Jul 31 12:33:06 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:33:06 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Tue Jul 31 12:33:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.641
[Tue Jul 31 12:33:06 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.99"
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src21.csv
[Tue Jul 31 14:51:34 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jul 31 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src21.csv
[Tue Jul 31 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:51:35 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jul 31 14:51:35 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jul 31 14:51:35 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Jul 31 17:13:12 2012] Source 13 is offset by 7.235764 and 6.714667 pixels which is larger than
2 X fitted extent = 1.847168 x 1.847168, not incorporating fit results
[Tue Jul 31 17:13:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 17:13:12 2012] Assessing source extent using major
[Tue Jul 31 17:13:12 2012] Source does appear to be extended
[Tue Jul 31 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 17:13:12 2012] Source is confused with source 19
[Tue Jul 31 18:43:45 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 18:43:45 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Tue Jul 31 18:43:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.641
[Tue Jul 31 18:43:45 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.99"
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src20.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src20.csv
[Tue Jul 31 20:51:05 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Jul 31 20:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src20.csv
[Tue Jul 31 20:51:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Jul 31 20:51:06 2012] fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Jul 31 20:51:06 2012] Fit fullrun_mos1_xmm0112980501_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Jul 31 22:23:42 2012] Warning, spatial fit 20 centroid is now closest to src. 12
[Tue Jul 31 22:23:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 22:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 22:23:42 2012] Assessing source extent using major
[Tue Jul 31 22:23:42 2012] Source does appear to be extended
[Tue Jul 31 22:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 23:30:30 2012] XMMSAS src. selection expression = ellipse(28830.147461, 28258.732056, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing source region out to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src13_src.reg
[Tue Jul 31 23:30:30 2012] Extracting stamp from image fullrun_mos1_xmm0112980501_pi300-10000_cl_sm2.00.img.gz, (294, 288) - (369, 363)
[Tue Jul 31 23:30:30 2012] XMMSAS bgd. selection expression = annulus(28830.147461, 28258.732056, 1087.500000, 2175.000000, X, Y) && !ellipse(27448.596960, 26823.293800, 1147.376033, 1147.376033, 0.000000, X, Y) && !ellipse(27089.074000, 26724.058000, 2250.552065, 2250.552065, 0.000000, X, Y) && !ellipse(26722.283179, 26217.305468, 1170.352034, 1088.689381, 304.299420, X, Y) && !ellipse(26177.164000, 26314.344000, 1034.800030, 1034.800030, 0.000000, X, Y) && !ellipse(28881.342000, 27451.318000, 1280.424037, 1280.424037, 0.000000, X, Y) && !ellipse(28716.663544, 26400.880615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.636688, 27668.720825, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28873.387268, 25803.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.070000, 28027.692000, 1267.616036, 1267.616036, 0.000000, X, Y) && !ellipse(25564.302000, 28235.000000, 1148.392033, 1148.392033, 0.000000, X, Y) && !ellipse(28149.730000, 28860.118000, 1083.504031, 1083.504031, 0.000000, X, Y)
[Tue Jul 31 23:30:30 2012] Writing fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src13.gif
[Tue Jul 31 23:45:21 2012] Mean detx,y = (1920.15, -38.74) 
[Tue Jul 31 23:45:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 23:45:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 23:45:32 2012] Setting source spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jul 31 23:45:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Aug  1 01:58:12 2012] Not generating rmf since there are only 57 counts
[Wed Aug  1 01:58:12 2012] rmf not generated due to insufficient counts
[Wed Aug  1 02:33:19 2012] Updating aperture counts using extracted products
[Wed Aug  1 02:33:19 2012] Error reading totcts from fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Aug  1 02:33:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 02:33:19 2012] Using photon index=1.80, rate=0.00506, arf fullrun_mos1_xmm0112980501_pi300-10000_pass1_cl_src13.arf
[Wed Aug  1 02:33:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 02:33:19 2012] Updating source flux to 5.2e-14
[Wed Aug  1 02:33:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting