[Thu Jul  5 11:28:16 2012] Detection parameters:
  Position = (315.0, 313.0) = 16 35 50.68 66 12 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 836.4 +/- 36.8
  Background counts = 33.1
  Rate = 0.05 +/- 0.002

[Thu Jul  5 11:28:17 2012] Off-axis axis estimate = 1.60'
[Thu Jul  5 13:29:40 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:29:40 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Thu Jul  5 13:29:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Thu Jul  5 13:29:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Thu Jul  5 14:51:53 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 14:51:53 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 14:51:53 2012] Fit fullrun_mos2_xmm0112980401_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Jul  5 14:51:54 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 14:51:54 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 14:51:54 2012] Fit fullrun_mos2_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 14:52:14 2012] Spatial fit model total counts = 3235.070000, observed total counts = 3238.000000
[Thu Jul  5 14:52:14 2012] Offset between fit and detection position for source 2 = 1.097080 pixels
[Thu Jul  5 14:52:14 2012] 3188.577000 total counts/ 2596.790000 bgd. counts: snr = 11.613069
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.097080 pixels
  Position = (315.1, 314.1) = 16 35 50.60 66 12 48.9
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 591.8 +/- 56.5
  Background counts = 2596.8
  Rate = 0.04 +/- 0.004
[Thu Jul  5 14:52:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 14:52:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 14:52:14 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 14:52:14 2012] Source does appear to be extended
[Thu Jul  5 14:52:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 14:52:14 2012] Source is confused with source 1
[Thu Jul  5 16:55:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 16:55:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 16:55:59 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Thu Jul  5 16:55:59 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.094
[Thu Jul  5 16:55:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.46"
[Thu Jul  5 18:09:01 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 18:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 18:09:01 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 18:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 18:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 18:09:01 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 18:09:01 2012] fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 18:09:01 2012] Fit fullrun_mos2_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 18:09:15 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Thu Jul  5 18:09:15 2012] Spatial fit model total counts = 2289.730000, observed total counts = 2247.000000
[Thu Jul  5 18:09:15 2012] Offset between fit and detection position for source 2 = 1.003679 pixels
[Thu Jul  5 18:09:15 2012] Warning, changing simple spatial fit ID from 1 to 13
[Thu Jul  5 18:09:15 2012] 2208.391000 total counts/ 1686.700000 bgd. counts: snr = 12.702653
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.003679 pixels
  Position = (314.6, 313.2) = 16 35 50.98 66 12 45.2
  Extent = 22.5 (18.2-26.9)", rotation angle = 0
  Source counts = 521.7 +/- 47.0
  Background counts = 1686.7
  Rate = 0.03 +/- 0.003
[Thu Jul  5 18:09:15 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 18:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 18:09:15 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 18:09:15 2012] Source does appear to be extended
[Thu Jul  5 18:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 12:59:14 2012] XMMSAS src. selection expression = ellipse(27321.110800, 27203.504000, 1349.718039, 1349.718039, 0.000000, X, Y)
[Fri Jul  6 12:59:14 2012] Writing source region out to fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul  6 12:59:14 2012] Extracting stamp from image fullrun_mos2_xmm0112980401_pi300-10000_cl_sm2.00.img.gz, (237, 236) - (392, 391)
[Fri Jul  6 12:59:14 2012] XMMSAS bgd. selection expression = annulus(27321.110800, 27203.504000, 2249.530065, 4499.060129, X, Y) && !ellipse(27287.266600, 27102.500000, 2313.104067, 2313.104067, 0.000000, X, Y) && !ellipse(26898.944000, 25637.296000, 735.859221, 262.743208, 15.131300, X, Y) && !ellipse(28394.220856, 28040.446167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28565.005615, 26544.738068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.000000, 25799.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26400.310000, 27637.384000, 1178.232034, 1178.232034, 0.000000, X, Y) && !ellipse(28807.200043, 27341.562805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27957.139313, 25184.080688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25110.831085, 27514.859222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27182.731200, 28413.714000, 1240.496036, 1240.496036, 0.000000, X, Y) && !ellipse(25742.186432, 25629.387512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26268.755737, 28659.978668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24966.984253, 26665.074615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25200.626831, 27963.883087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24365.916000, 26447.720000, 832.032024, 832.032024, 0.000000, X, Y) && !ellipse(26065.215881, 24947.206940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24520.536000, 27775.546000, 1147.928033, 1147.928033, 0.000000, X, Y)
[Fri Jul  6 12:59:14 2012] Writing fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2.gif
[Fri Jul  6 12:59:17 2012] Mean detx,y = (543.97, 46.17) 
[Fri Jul  6 12:59:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 12:59:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 12:59:35 2012] Setting source spectrum file to fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 12:59:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul  6 13:30:14 2012] Updating aperture counts using extracted products
[Fri Jul  6 13:30:14 2012] Error reading totcts from fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 13:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 13:30:14 2012] Using photon index=1.80, rate=0.034, arf fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 13:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 13:30:14 2012] Updating source flux to 3.2e-13
[Fri Jul  6 13:35:22 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jul  6 13:35:58 2012] Reading fit data from xmm0112980401/analysis//spectral/fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul  6 13:35:58 2012] Spectral fit parameter nH value = 6.16762e+20
[Fri Jul  6 13:35:58 2012] Spectral fit parameter PhoIndex value = 1.73555
[Fri Jul  6 13:35:58 2012] Failed to get F(0.3-8.0) from xmm0112980401/analysis//spectral/fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 13:35:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 13:35:58 2012] Using Nh = 6.2e+20, photon index=1.74, rate=0.034, arf fullrun_mos2_xmm0112980401_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 13:35:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 13:35:58 2012] Updating source flux to 3.6e-13