[Thu Jul 5 11:27:51 2012] Detection parameters: Position = (305.7, 333.6) = 16 35 57.34 66 14 21.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 62.2 +/- 12.9 Background counts = 27.0 Rate = 0.005 +/- 0.001 [Thu Jul 5 11:27:52 2012] Off-axis axis estimate = 2.60' [Thu Jul 5 12:13:39 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting [Thu Jul 5 12:13:39 2012] Initial guess for spatial extent in simple fitting = 7.73" [Thu Jul 5 12:13:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.157 [Thu Jul 5 12:13:39 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.73" [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src20.ximg exists [Thu Jul 5 13:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src20.csv [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src20_1.ximg exists [Thu Jul 5 13:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src20.csv [Thu Jul 5 13:29:39 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Thu Jul 5 13:29:39 2012] Fit fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Thu Jul 5 14:52:07 2012] Warning, spatial fit 20 centroid is now closest to src. 11 [Thu Jul 5 14:52:07 2012] Vigneting correction estimate = 1.000000 [Thu Jul 5 14:52:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 5 14:52:07 2012] Assessing source extent using major [Thu Jul 5 14:52:07 2012] Source does appear to be extended [Thu Jul 5 14:52:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 5 14:52:07 2012] Source is confused with source 11 [Thu Jul 5 15:48:53 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting [Thu Jul 5 15:48:53 2012] Initial guess for spatial extent in simple fitting = 7.73" [Thu Jul 5 15:48:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.157 [Thu Jul 5 15:48:53 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.73" [Thu Jul 5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src18.ximg exists [Thu Jul 5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src18_1.ximg exists [Thu Jul 5 16:55:59 2012] Fit fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src18 appears to have run properly [Thu Jul 5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Thu Jul 5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Thu Jul 5 16:55:59 2012] Fit fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly [Thu Jul 5 18:09:11 2012] Spatial fit model total counts = 784.829000, observed total counts = 785.000000 [Thu Jul 5 18:09:11 2012] Offset between fit and detection position for source 8 = 4.968470 pixels [Thu Jul 5 18:09:11 2012] Warning, changing simple spatial fit ID from 18 to 8 [Thu Jul 5 18:09:11 2012] 744.085900 total counts/ 669.751000 bgd. counts: snr = 2.872342 Spatial fit parameters: Offset between fit and detection position for source 8 = 4.968470 pixels Position = (301.1, 335.3) = 16 36 0.69 66 14 21.3 Extent = 15.1 (15.1-30.2)", rotation angle = 0 Source counts = 74.3 +/- 27.3 Background counts = 669.8 Rate = 0.005 +/- 0.002 [Thu Jul 5 18:09:11 2012] Source 8 is offset by -2.405954 and 1.813152 pixels which is larger than 2 X fitted extent = 0.890869 x 0.890869, not incorporating fit results [Thu Jul 5 18:09:11 2012] Vigneting correction estimate = 1.000000 [Thu Jul 5 18:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 5 18:09:11 2012] Assessing source extent using major axis lower bound [Thu Jul 5 18:09:11 2012] Source does appear to be extended [Thu Jul 5 18:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 6 09:52:51 2012] XMMSAS src. selection expression = ellipse(26146.766000, 29125.408000, 907.014026, 907.014026, 0.000000, X, Y) [Fri Jul 6 09:52:51 2012] Writing source region out to fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src8_src.reg [Fri Jul 6 09:52:51 2012] Extracting stamp from image fullrun_mos1_xmm0112980401_pi300-10000_cl_sm2.00.img.gz, (249, 283) - (353, 387) [Fri Jul 6 09:52:51 2012] XMMSAS bgd. selection expression = annulus(26146.766000, 29125.408000, 1511.690043, 3023.380087, X, Y) && !ellipse(27316.142180, 27181.444200, 2305.760066, 2305.760066, 0.000000, X, Y) && !ellipse(27424.528700, 27530.996000, 1189.952034, 1189.952034, 0.000000, X, Y) && !ellipse(26521.272000, 27160.336000, 1790.040052, 1790.040052, 0.000000, X, Y) && !ellipse(25719.862946, 26146.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.701599, 25540.911316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22468.468933, 30040.625763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.990906, 28557.582153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.826000, 27588.628000, 1172.128034, 1172.128034, 0.000000, X, Y) && !ellipse(27788.898000, 28198.784000, 1273.432037, 1273.432037, 0.000000, X, Y) && !ellipse(25249.471405, 26142.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24785.178467, 27613.089996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.112000, 26944.608000, 2046.200059, 2046.200059, 0.000000, X, Y) && !ellipse(28254.969879, 28746.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.469482, 26490.835663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29507.503845, 26745.036133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29610.258789, 26151.753906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29873.256000, 28025.394000, 1277.920037, 1277.920037, 0.000000, X, Y) [Fri Jul 6 09:52:51 2012] Writing fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src8.gif [Fri Jul 6 10:08:22 2012] Mean detx,y = (1451.86, -2431.24) [Fri Jul 6 10:08:24 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jul 6 10:08:39 2012] Binned source spectrum to 10 counts/bin [Fri Jul 6 10:08:39 2012] Setting source spectrum file to fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Fri Jul 6 10:08:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src8_bgd.pi.gz [Fri Jul 6 12:50:29 2012] Not generating rmf since there are only 74 counts [Fri Jul 6 12:50:29 2012] rmf not generated due to insufficient counts [Fri Jul 6 13:30:13 2012] Updating aperture counts using extracted products [Fri Jul 6 13:30:13 2012] Error reading totcts from fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Fri Jul 6 13:30:14 2012] Calculating source flux in energy range 0.30-8.00 [Fri Jul 6 13:30:14 2012] Using photon index=1.80, rate=0.00487, arf fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src8.arf [Fri Jul 6 13:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jul 6 13:30:14 2012] Updating source flux to 4.9e-14 [Fri Jul 6 13:30:15 2012] Flag b found in src. 8 procflags, skipping spectral fitting [Fri Jul 6 13:30:15 2012] Flag c found in src. 8 procflags, skipping spectral fitting [Fri Jul 6 13:30:15 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting