[Thu Jul 5 11:27:51 2012] Detection parameters: Position = (305.0, 339.5) = 16 35 57.85 66 14 38.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 52.4 +/- 11.5 Background counts = 23.4 Rate = 0.004 +/- 0.0008 [Thu Jul 5 11:27:52 2012] Off-axis axis estimate = 3.02' [Thu Jul 5 12:13:39 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting [Thu Jul 5 12:13:39 2012] Initial guess for spatial extent in simple fitting = 7.94" [Thu Jul 5 12:13:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.648 [Thu Jul 5 12:13:39 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.94" [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src23.ximg exists [Thu Jul 5 13:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src23.csv [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src23_1.ximg exists [Thu Jul 5 13:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src23.csv [Thu Jul 5 13:29:39 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Thu Jul 5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Thu Jul 5 13:29:39 2012] Fit fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly [Thu Jul 5 14:52:07 2012] Spatial fit model total counts = 360.454000, observed total counts = 349.000000 [Thu Jul 5 14:52:07 2012] Offset between fit and detection position for source 7 = 0.108737 pixels [Thu Jul 5 14:52:07 2012] 345.167800 total counts/ 327.145000 bgd. counts: snr = 0.996442 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.108737 pixels Position = (305.1, 339.5) = 16 35 57.78 66 14 39.3 Extent = 3.6 (2.0-7.1)", rotation angle = 0 Source counts = 18.0 +/- 18.6 Background counts = 327.1 Rate = 0.001 +/- 0.001 Deleting source due to low Poisson probability