[Thu Jul  5 11:27:51 2012] Detection parameters:
  Position = (318.9, 332.6) = 16 35 47.85 66 14 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.0 +/- 14.2
  Background counts = 25.8
  Rate = 0.007 +/- 0.001

[Thu Jul  5 11:27:52 2012] Off-axis axis estimate = 2.89'
[Thu Jul  5 12:13:39 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:13:39 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Thu Jul  5 12:13:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.562
[Thu Jul  5 12:13:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.87"
[Thu Jul  5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul  5 13:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul  5 13:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 13:29:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul  5 13:29:39 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul  5 13:29:39 2012] Fit fullrun_mos1_xmm0112980401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul  5 14:52:07 2012] Source 10 is offset by -4.168636 and -8.647314 pixels which is larger than
2 X fitted extent = 7.238989 x 7.238989, not incorporating fit results
[Thu Jul  5 14:52:07 2012] Source 10 is offset by -1.244728 and 7.910250 pixels which is larger than
2 X fitted extent = 7.318575 x 7.318575, not incorporating fit results
[Thu Jul  5 14:52:07 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 14:52:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 14:52:07 2012] Assessing source extent using major
[Thu Jul  5 14:52:07 2012] Source does appear to be extended
[Thu Jul  5 14:52:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 14:52:07 2012] Source is confused with source 9
[Thu Jul  5 15:48:53 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 15:48:53 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Thu Jul  5 15:48:53 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.562
[Thu Jul  5 15:48:53 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.87"
[Thu Jul  5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jul  5 16:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src10.csv
[Thu Jul  5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jul  5 16:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src10.csv
[Thu Jul  5 16:55:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jul  5 16:55:59 2012] fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jul  5 16:55:59 2012] Fit fullrun_mos1_xmm0112980401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Jul  5 18:09:11 2012] Spatial fit model total counts = 607.058000, observed total counts = 595.000000
[Thu Jul  5 18:09:11 2012] Offset between fit and detection position for source 10 = 6.506655 pixels
[Thu Jul  5 18:09:11 2012] 583.825000 total counts/ 481.906000 bgd. counts: snr = 4.642736
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.506655 pixels
  Position = (316.0, 326.8) = 16 35 49.94 66 13 44.0
  Extent = 15.7 (15.7-31.5)", rotation angle = 0
  Source counts = 101.9 +/- 24.2
  Background counts = 481.9
  Rate = 0.007 +/- 0.002
[Thu Jul  5 18:09:11 2012] Spatial fit model total counts = 657.226000, observed total counts = 627.000000
[Thu Jul  5 18:09:11 2012] Offset between fit and detection position for source 10 = 4.447600 pixels
[Thu Jul  5 18:09:11 2012] Warning, changing simple spatial fit ID from 10 to 16
[Thu Jul  5 18:09:11 2012] 627.111000 total counts/ 518.857000 bgd. counts: snr = 4.752478
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.447600 pixels
  Position = (320.0, 324.7) = 16 35 47.11 66 13 34.9
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 108.3 +/- 25.0
  Background counts = 518.9
  Rate = 0.007 +/- 0.002
[Thu Jul  5 18:09:11 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 18:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 18:09:11 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 18:09:11 2012] Source does appear to be extended
[Thu Jul  5 18:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 09:52:51 2012] XMMSAS src. selection expression = ellipse(27788.898000, 28198.784000, 955.074027, 955.074027, 0.000000, X, Y)
[Fri Jul  6 09:52:51 2012] Writing source region out to fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src10_src.reg
[Fri Jul  6 09:52:51 2012] Extracting stamp from image fullrun_mos1_xmm0112980401_pi300-10000_cl_sm2.00.img.gz, (265, 270) - (375, 380)
[Fri Jul  6 09:52:51 2012] XMMSAS bgd. selection expression = annulus(27788.898000, 28198.784000, 1591.790046, 3183.580092, X, Y) && !ellipse(27316.142180, 27181.444200, 2305.760066, 2305.760066, 0.000000, X, Y) && !ellipse(27424.528700, 27530.996000, 1189.952034, 1189.952034, 0.000000, X, Y) && !ellipse(26521.272000, 27160.336000, 1790.040052, 1790.040052, 0.000000, X, Y) && !ellipse(25719.862946, 26146.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.701599, 25540.911316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.990906, 28557.582153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.826000, 27588.628000, 1172.128034, 1172.128034, 0.000000, X, Y) && !ellipse(25249.471405, 26142.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24785.178467, 27613.089996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.112000, 26944.608000, 2046.200059, 2046.200059, 0.000000, X, Y) && !ellipse(28254.969879, 28746.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.469482, 26490.835663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26146.766000, 29125.408000, 1209.352035, 1209.352035, 0.000000, X, Y) && !ellipse(25865.650000, 24728.020000, 1080.960031, 1080.960031, 0.000000, X, Y) && !ellipse(29507.503845, 26745.036133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29610.258789, 26151.753906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29873.256000, 28025.394000, 1277.920037, 1277.920037, 0.000000, X, Y)
[Fri Jul  6 09:52:51 2012] Writing fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src10.gif
[Fri Jul  6 10:05:57 2012] Mean detx,y = (1194.53, -638.14) 
[Fri Jul  6 10:05:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 10:06:13 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 10:06:13 2012] Setting source spectrum file to fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul  6 10:06:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jul  6 13:30:13 2012] Updating aperture counts using extracted products
[Fri Jul  6 13:30:13 2012] Error reading totcts from fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul  6 13:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 13:30:14 2012] Using photon index=1.80, rate=0.00709, arf fullrun_mos1_xmm0112980401_pi300-10000_pass1_cl_src10.arf
[Fri Jul  6 13:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 13:30:14 2012] Updating source flux to 6.6e-14
[Fri Jul  6 13:30:15 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Fri Jul  6 13:30:15 2012] Flag c found in src. 10 procflags, skipping spectral fitting