[Sat Nov 26 12:35:16 2011] Detection parameters:
  Position = (253.2, 269.1) = 6 58 36.57 -55 58 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 379.3 +/- 30.7
  Background counts = 133.6
  Rate = 0.01 +/- 0.0008

[Sat Nov 26 12:35:17 2011] Off-axis axis estimate = 3.91'
[Sat Nov 26 16:20:04 2011] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 16:20:04 2011] Initial guess for spatial extent in simple fitting = 8.38"
[Sat Nov 26 16:20:04 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.061
[Sat Nov 26 16:20:04 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 8.38"
[Sat Nov 26 18:46:53 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src9.ximg exists
[Sat Nov 26 18:46:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src9.csv
[Sat Nov 26 18:46:53 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Nov 26 18:46:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src9.csv
[Sat Nov 26 18:46:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 18:46:54 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Nov 26 18:46:54 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Nov 26 18:46:54 2011] Fit fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Nov 26 18:47:37 2011] Spatial fit model total counts = 3574.560000, observed total counts = 3570.000000
[Sat Nov 26 18:47:37 2011] Offset between fit and detection position for source 38 = 7.172288 pixels
[Sat Nov 26 18:47:37 2011] 3670.573000 total counts/ 3163.300000 bgd. counts: snr = 9.019273
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 7.172288 pixels
  Position = (256.7, 275.4) = 6 58 34.72 -55 57 39.1
  Extent = 16.8 (15.1-33.5)", rotation angle = 0
  Source counts = 507.3 +/- 60.6
  Background counts = 3163.3
  Rate = 0.01 +/- 0.001
[Sat Nov 26 18:47:37 2011] Spatial fit model total counts = 2365.480000, observed total counts = 2365.000000
[Sat Nov 26 18:47:37 2011] Offset between fit and detection position for source 38 = 4.614171 pixels
[Sat Nov 26 18:47:37 2011] Warning, changing simple spatial fit ID from 9 to 23
[Sat Nov 26 18:47:37 2011] 2361.854000 total counts/ 2070.710000 bgd. counts: snr = 6.398058
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 4.614171 pixels
  Position = (252.4, 276.8) = 6 58 36.99 -55 57 32.9
  Extent = 17.2 (17.2-34.5)", rotation angle = 0
  Source counts = 291.1 +/- 48.6
  Background counts = 2070.7
  Rate = 0.007 +/- 0.001
[Sat Nov 26 18:47:38 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 18:47:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 18:47:38 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 18:47:38 2011] Source does appear to be extended
[Sat Nov 26 18:47:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 18:47:38 2011] Source is confused with source 4
[Sat Nov 26 22:05:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:05:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 22:05:35 2011] Initial guess for spatial extent in simple fitting = 17.25"
[Sat Nov 26 22:05:35 2011] source mask rpix=4.0, npix_max = 79, mask sum = 66, frac = 0.828
[Sat Nov 26 22:05:35 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 17.25"
[Sun Nov 27 01:00:57 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src9.ximg exists
[Sun Nov 27 01:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src9.csv
[Sun Nov 27 01:00:57 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Nov 27 01:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src9.csv
[Sun Nov 27 01:00:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 01:00:58 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Nov 27 01:00:58 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Nov 27 01:00:58 2011] Fit fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Nov 27 01:01:41 2011] Warning, spatial fit 9 centroid is now closest to src. 7
[Sun Nov 27 01:01:41 2011] Source 38 is offset by -2.900805 and 7.965517 pixels which is larger than
2 X fitted extent = 3.970322 x 3.970322, not incorporating fit results
[Sun Nov 27 01:01:41 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 01:01:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 01:01:41 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 01:01:41 2011] Source does appear to be extended
[Sun Nov 27 01:01:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 12:28:45 2011] XMMSAS src. selection expression = ellipse(21906.322000, 24031.468000, 1034.934030, 1034.934030, 0.000000, X, Y)
[Sun Nov 27 12:28:45 2011] Writing source region out to fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src38_src.reg
[Sun Nov 27 12:28:45 2011] Extracting stamp from image fullrun_mos2_xmm0112980201_pi300-10000_cl_sm2.00.img.gz, (193, 217) - (312, 336)
[Sun Nov 27 12:28:45 2011] XMMSAS bgd. selection expression = annulus(21906.322000, 24031.468000, 1724.890050, 3449.780099, X, Y) && !ellipse(24686.111200, 25334.424400, 909.824026, 909.824026, 0.000000, X, Y) && !ellipse(22923.693000, 25500.392600, 1229.976035, 1229.976035, 0.000000, X, Y) && !ellipse(22876.663200, 24177.246600, 590.856817, 590.856817, 0.000000, X, Y) && !ellipse(24025.810883, 24538.321808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.658142, 26927.975616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21217.270000, 24798.670400, 1364.928039, 1364.928039, 0.000000, X, Y) && !ellipse(22051.886000, 26288.980000, 2575.680074, 2183.336063, 90.000000, X, Y) && !ellipse(20832.058000, 24721.246000, 1242.984036, 1242.984036, 0.000000, X, Y) && !ellipse(18574.528000, 20223.374400, 1622.800047, 1622.800047, 0.000000, X, Y) && !ellipse(20797.844000, 22880.038000, 1379.912040, 1379.912040, 0.000000, X, Y) && !ellipse(23191.848320, 26145.900000, 2152.216062, 2152.216062, 0.000000, X, Y) && !ellipse(21227.170000, 23005.824000, 2114.288061, 717.185621, 260.669000, X, Y) && !ellipse(21986.916977, 27168.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23758.011353, 27705.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25786.183040, 21874.721800, 474.592014, 474.592014, 0.000000, X, Y) && !ellipse(20108.746000, 24622.340600, 1393.432040, 1393.432040, 0.000000, X, Y) && !ellipse(22227.378998, 22583.309570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22364.399750, 28190.957123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21439.902000, 27216.980000, 1287.840037, 1287.840037, 0.000000, X, Y)
[Sun Nov 27 12:28:45 2011] Writing fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src38.gif
[Sun Nov 27 12:52:38 2011] Mean detx,y = (-2969.53, -941.45) 
[Sun Nov 27 12:52:40 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 12:53:09 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 12:53:10 2011] Setting source spectrum file to fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sun Nov 27 12:53:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sun Nov 27 17:35:04 2011] Updating aperture counts using extracted products
[Sun Nov 27 17:35:04 2011] Error reading totcts from fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sun Nov 27 17:35:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 17:35:07 2011] Using photon index=1.80, rate=0.00696, arf fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src38.arf
[Sun Nov 27 17:35:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 17:35:07 2011] Updating source flux to 6.3e-14
[Sun Nov 27 17:39:41 2011] Flag b found in src. 38 procflags, skipping spectral fitting
[Sun Nov 27 17:39:41 2011] Flag c found in src. 38 procflags, skipping spectral fitting